E-Bike Tuning Store

Over 200 tuning products with which you can cancel the maximum engine support of more than 30 engines in various ways. Many of these tuning solutions are only available exclusively from us. In addition, we have compiled a list of the necessary "Tools" and other recommended "Products" for e-bike tuning:

1. Start the configurator: apply filter!

2. Read our introduction to the topic "Howto" or have a look at our "Comparison"!

3. Many exclusive e-bike tuning products for the best e-bike motors:

SHOW FILTER
MBIQ-P Ebike Tuning Chip for Bosch Smart System BES3
New
PRE ORDER
OUT STOCK

TYPE: Bosch Smart System

VENDOR: MBIQ

MBIQ-P Ebike Tuning Chip for Bosch Smart System BES3 mid-mounted engines The MBIQ-P is a microcontroller-based tuning chip for removing the 25 km/h speed limit of e-bikes with Bosch Smart System mid-mounted motors. By unlocking the speed limit, the full...

169,00 €
169,00 €
MBIQ-S Tuning Sensor for Shimano Steps E5xxx - E8xxx E-Bikes with SM DUE10
New
PRE ORDER
OUT STOCK

TYPE: Shimano

VENDOR: MBIQ

MBIQ-S Tuning Sensor for Shimano Steps E5xxx - E8xxx E-Bikes with SM DUE10 A microcontroller-based sensor solution for e-bikes with Shimano Steps mid-mounted motors. This tuning tool completely removes the 25 km/h speed limit so that you can finally enjoy...

134,90 €
134,90 €
MBIQ-P Plug-in for Shimano STEPS
New
PRE ORDER
OUT STOCK

TYPE: Shimano

VENDOR: MBIQ

MBIQ-P Plug-In Solution for Shimano STEPS E5xxx - E8xxx An ingenious plug-in solution to easily remove the 25 km/h speed limit of Shimano STEPS e-bike motors. This allows you to use the full potential of the Shimano drives, so that...

149,90 €
149,90 €
MBIQ-P Plug-in solution for Bosch e-bikes
New
PRE ORDER
OUT STOCK

TYPE: Bosch Gen2, Bosch Gen3, Bosch Gen4

VENDOR: MBIQ

MBIQ-P plug-in solution for Bosch e-bikes This is a microcontroller-based tuning tool in the form of a practical plug-in solution. The MBIQ-P removes the 25 km/h speed limit of Bosch e-bike mid-mounted motors completely. This allows the Bosch drive to...

149,90 €
149,90 €
MBIQ-S Tuning Sensor for AEG / Bafang / Prophete with 4pin plug blue (HIGO)
New
PRE ORDER
OUT STOCK

TYPE: AEG, Bafang

VENDOR: MBIQ

MBIQ-S Tuning Sensor for AEG / Bafang / Prophete with 4pin plug blue (HIGO) A practical tuning tool in the form of a ready-made sensor solution. The MBIQ-S completely removes the 25 km/h speed limit of e-bike drives - which...

149,90 €
149,90 €
MBIQ-S Tuning Sensor for AEG / Bafang / Prophete with JST plug (4pin)
New
PRE ORDER
OUT STOCK

TYPE: AEG, Bafang

VENDOR: MBIQ

MBIQ-S Tuning Sensor for AEG / Bafang / Prophete with 4pin JST plug This is a practical tuning tool in the form of a ready-made sensor solution. The MBIQ-S removes the 25 km/h speed limit of e-bike drives completely -...

149,90 €
149,90 €
MBIQ-S Tuning Sensor for Bosch E-Bikes
New
PRE ORDER
OUT STOCK

TYPE: Bosch Gen2, Bosch Gen3, Bosch Gen4

VENDOR: MBIQ

MBIQ-S Tuning Sensor for Bosch E-Bikes Here we have a simple but efficient tuning tool for e-bikes with Bosch mid-mounted motors. The MBIQ-S is a microcontroller-based sensor solution that completely removes the speed limit of Bosch drives. There are no...

134,90 €
134,90 €
MBIQ-S Tuning Sensor for Shimano Steps E5xxx - E8xxx E-Bikes with SM DUE11
New
PRE ORDER
OUT STOCK

TYPE: Shimano

VENDOR: MBIQ

MBIQ-S Tuning Sensor for Shimano Steps E5xxx - E8xxx E-Bikes with SM DUE11 This is a microcontroller-based sensor solution for e-bikes with Shimano Steps mid-mounted motors. This tuning tool completely removes the 25 km/h speed limit so that you can...

134,90 €
134,90 €
MBevo for Brose / Specialized (Levo)
New
PRE ORDER
OUT STOCK

TYPE: Specialized

VENDOR: MBIQ

MBevo Ebike Tuning for Brose / Specialized (Levo) mid-mounted motors With this practical plug-in solution you can completely remove the factory speed limit of many Specialized / Brose e-bike motors. There is no longer a 25 km/h speed limit and...

149,90 €
149,90 €
MBIQ-CC Universal for mid-mounted motors
New
PRE ORDER
OUT STOCK

TYPE: Bosch Gen2, Bosch Gen3, Bosch Gen4, Panasonic, Shimano, Brose, Specialized

VENDOR: MBIQ

MBIQ-CC E-Bike Tuning Universal for mid-mounted motors, programmable A universal tuning solution that is compatible with e-bike motors from different manufacturers, as long as the motors are equipped with 2-wire speed sensors - e.g. with various Bosch, Shimano Steps, Brose...

99,90 €
99,90 €
MBIQ-P Chip for FAZUA Ride 60
New
-14%
PRE ORDER
OUT STOCK

TYPE: Fazua

VENDOR: MBIQ

MBIQ-P Ebike Tuning for FAZUA Ride 60 mid-mounted engines This tuning tool is a practical plug-in solution that allows you to unlock the 25 km/h speed limit of your Fazua Ride 60 e-bike. By unlocking it, you can ride much...

149,90 €129,90 €
149,90 €129,90 €
MBIQ-P for ANANDA & MOMAS & AEG Comfort Drive V2
New
PRE ORDER
OUT STOCK

TYPE: Ananda

VENDOR: MBIQ

MBIQ-P for ANANDA & MOMAS & AEG Comfort Drive V2 A tuning chip for various ANANDA (M60 / M81, M100 / M230, M1000 / M4000 / M5000 / M6100) and MOMAS (Ultra 70 / 80 / 110 Ultralight, Pro, Turbo /...

134,90 €
134,90 €
MBIQ-P for Shimano EP8 / EP800 / EP8-RS
New
PRE ORDER
OUT STOCK

TYPE: Shimano

VENDOR: MBIQ

MBIQ-P for Shimano EP8 / EP800 / EP8-RS With this ingenious tuning tool, not only can the 25 km/h speed limit of Shimano EP8 e-bikes be lifted, you can even set the top speed individually. The MBIQ-P is a practical plugin...

149,90 €
149,90 €
MBIQ-P for Shimano EP801 / EP6 / EP600
New
PRE ORDER
OUT STOCK

TYPE: Shimano

VENDOR: MBIQ

MBIQ-P for Shimano EP801 / EP6 / EP600 The MBIQ-P for Shimano EP801/EP6/EP600 mid-motors is a "hybrid" tuning module with two different manipulation modes on board. It was specially developed for the latest generation of motors. In addition to the...

169,00 €
169,00 €
MBIQ-P for TQ HPR 50
New
PRE ORDER
OUT STOCK
TQ

TYPE: TQ

VENDOR: MBIQ

MBIQ-P for TQ HPR 50 This tuning tool completely removes the 25 km/h speed limit of e-bikes with TQ HPR 50 mid-mounted motors, allowing you to ride much faster with full motor support. This tuning is therefore limited to the...

149,00 €
149,00 €
MBIQ-P for VINKA mid-mounted motors (3-pole)
New
PRE ORDER
OUT STOCK

TYPE: Yamaha Powerdrive, Yamaka Syncdrive

VENDOR: MBIQ

MBIQ-P for VINKA mid-mounted motors (3-pole) Use the full potential of your VINKA e-bike! This tuning tool removes the 25 km/h speed limit of VINKA e-bike mid-mounted motors - you can then ride much faster with 100 percent motor support....

149,90 €
149,90 €
MBIQ-P Plug-In for AEG / BAFANG / Giant / Yamaha (3pin)
New
PRE ORDER
OUT STOCK

TYPE: Yamaha Powerdrive, Yamaka Syncdrive

VENDOR: MBIQ

MBIQ-P Plug-In Solution for AEG / Bafang / Giant / Yamaha (3pin) The MBIQ-P is a microcontroller-based tuning tool for e-bikes with AEG, Bafang, Giant or Yamaha mid-mounted motors with 3-pole connectors. This tuning tool is limited in its range...

149,90 €
149,90 €
MBIQ-P Plug-in for Yamaha PW-X3 & Giant Syncdrive Pro 2
New
PRE ORDER
OUT STOCK

TYPE: Yamaha Powerdrive, Yamaha Syncdrive

VENDOR: MBIQ

MBIQ-P Plug-In Solution for Yamaha PW-X3 & Giant Syncdrive Pro 2 E-Bikes This microcontroller-based tuning module completely removes the 25 km/h speed limit of your Yamaha PW-X3 or Syncdrive Pro 2 e-bike. This means no more annoying speed limit and...

149,90 €
149,90 €
MBIQ-P Plug-in solution AEG, Panasonic & Flyer (2pin)
New
PRE ORDER
OUT STOCK

TYPE: Panasonic

VENDOR: MBIQ

MBIQ-P Plug-In Solution for AEG / Panasonic / Flyer (2pin) The MBIQ-P is a microcontroller-based tuning tool that removes the 25 km/h speed limit of AEG / Panasonic / Flyer e-bike motors. There are no further functions. As it is...

149,90 €
149,90 €
MBIQ-P Plug-In solution for AEG / Bafang BBS01 BBS02 motors with Hall sensor (3pin)
New
PRE ORDER
OUT STOCK

TYPE: AEG, Bafang

VENDOR: MBIQ

MBIQ-P Plug-in solution for AEG / Bafang BBS01 BBS02 motors with Hall sensor (3pin) With this practical tuning tool, you can easily remove the 25 km/h speed limit of your e-bike so that you can finally use the full power...

149,90 €
149,90 €
MBIQ-S Ebike Tuning for ANANDA mid-mounted motors
New
PRE ORDER
OUT STOCK

TYPE: Ananda

VENDOR: MBIQ

MBIQ-S Ebike Tuning for ANANDA mid-mounted motors A microcontroller-based tuning tool for e-bikes with ANANDA mid-mounted motors that completely removes the 25 km/h speed limit. The tool comes as a ready-to-use sensor solution that simply needs to be exchanged for...

134,90 €
134,90 €
MBIQ-S Ebike Tuning for Bafang M500 M600 M800 (8pin connector)
New
PRE ORDER
OUT STOCK

TYPE: Bafang

VENDOR: MBIQ

MBIQ-S Ebike Tuning for Bafang M500 M600 M800 (8pin connector) This microcontroller-based tuning tool is a ready-to-use sensor solution for unlocking Bafang e-bikes with mid-mounted motors. To unlock the speed limit, the existing speed sensor must be replaced with the...

149,90 €
149,90 €
MBIQ-S Tuning Sensor for FISCHER
New
PRE ORDER
OUT STOCK

TYPE: Fischer

VENDOR: MBIQ

MBIQ-S Tuning Sensor for FISCHER e-bike mid-mounted motors This is a simple but highly effective tuning tool as a ready-made sensor solution. The speed limit of FISCHER e-bike motors is completely removed by the MBIQ-S. The tool is easy to...

149,90 €
149,90 €
MBIQ-S Tuning Sensor for Shimano EP-8 / EP800 / DU-EP800
New
PRE ORDER
OUT STOCK

TYPE: Shimano

VENDOR: MBIQ

MBIQ-S for Shimano EP-8 / EP800 / DU-EP800 A microcontroller-based tuning sensor for Shimano Steps and Shimano EP8 e-bike mid-mounted motors (also DU-EP800). With this tuning tool, the 25 km/h limitation of the motor support can be completely removed, so that...

149,90 €
149,90 €
Pre-loader