MBIQ-S Tuning Sensor for FISCHER

MBIQ-S Tuning Sensor for FISCHER e-bike mid-mounted motors

This is a simple but highly effective tuning tool as a ready-made sensor solution. The speed limit of FISCHER e-bike motors is completely removed by the MBIQ-S. The tool is easy to install, as in principle you only need to replace the existing speed sensor with the MBIQ-S. Compatible connectors ensure an optimal connection. Thanks to highly integrated electronics, the tuning tool requires extremely little installation space. Simply keep the original sensor in case you want to restore your FISCHER e-bike to its original state at some point.

The tool is microcontroller-based and completely maintenance-free. It also does not require its own battery. After installation, the MBIQ-P analyses the current speed profile and generates manipulated values if the tuning is active. This removes the 25 km/h speed limit and you can ride much faster with full motor support.

Please note that your e-bike display, when tuning is switched on, will output manipulated values from a speed of approx. 22 km/h onwards due to this special mode of operation (=no correct speed display from approx. 22 km/h onwards).

By the way, the evaluation of the engine software is not influenced by the MBIQ-S.

Note: The MBIQ-S is very similar to the original sensor, so that the appearance of the e-bike is not changed.

Programmable by the customer

The MBIQ-S can be custom-programmed - this gives you the option of choosing between three different operating modes, allowing you to turn the tuning on and off. Programming is done via specific, sequential wheel movements when the e-bike is switched on. A smartphone or PC is not required.

The following operating modes can be selected:

-Mode 1: Tuning permanently activated (speed limit completely removed, no correct speed display from approx. 22 km/h).

-Mode 2: Tuning permanently deactivated (motor support only up to 25 km/h, real speed is displayed).

-Mode 3: Tuning activation according to switch-on condition (with the help of the magnet). To activate tuning, the magnet must be in front of the sensor for approx. 3-4 seconds during start-up, otherwise tuning is deactivated.

If performed correctly, the display shows the set operating mode by outputting different speeds.

MBIQ-S Tuning Sensor for FISCHER - Compatibility

This tuning tool is compatible with FISCHER e-bike mid-mounted motors with 3-pin connector - for example MONTIS models with Silent-Drive mid-mounted motor.

Please check the sensor + connector for compatibility in advance!

MBIQ-S Tuning Sensor for FISCHER e-bike mid-mounted motors - Technical data

-Type of connection: exchange sensor.

-Operating principle: Speed manipulation (no halving).

-Display indication: Manipulated values from approx. 22 km/h.

-Connection length: 40 cm.

-Can be switched on/off: Yes, via programming.

-Power supply: No battery required, the MBIQ-S is passively supplied via the sensor path.

-Weight: approx. 15 g.