Bafang

Badass Box 4 for Bafang Attention: Only compatible with the sensor shown above! A simple but highly effective tuning solution for e-bikes with Bafang mid-mounted motors. The Badass Box 4 completely removes the 25 km/h speed limit of the drive...

MBIQ-S Tuning Sensor for AEG / Bafang / Prophete with 4pin plug blue (HIGO) A practical tuning tool in the form of a ready-made sensor solution. The MBIQ-S completely removes the 25 km/h speed limit of e-bike drives - which...

MBIQ-S Tuning Sensor for AEG / Bafang / Prophete with 4pin JST plug This is a practical tuning tool in the form of a ready-made sensor solution. The MBIQ-S removes the 25 km/h speed limit of e-bike drives completely -...

PearTune MSO 4.0 Tuning for Bafang M200, M300, M400 and M420 with CAN Bus The PearTune MSO completely removes the 25 km/h speed limit of Bafang e-bikes with CAN Bus (see below for exact compatibility). By removing the speed limit,...

MBIQ-P Plug-in solution for AEG / Bafang BBS01 BBS02 motors with Hall sensor (3pin) With this practical tuning tool, you can easily remove the 25 km/h speed limit of your e-bike so that you can finally use the full power...

MBIQ-S Ebike Tuning for Bafang M500 M600 M800 (8pin connector) This microcontroller-based tuning tool is a ready-to-use sensor solution for unlocking Bafang e-bikes with mid-mounted motors. To unlock the speed limit, the existing speed sensor must be replaced with the...

PearTune MSO 3.0 STILL ON for Bafang M200, M410, M500, M510 with CAN Bus Use the full potential of your e-bike! This tuning tool removes the 25 km/h speed limit of e-bikes with Bafang M200, M500, M510 motors. This means...

PearTune MSO 3.0 Still On for Bafang M500 and M510 Use the full potential of your e-bike! This tuning tool removes the 25 km/h speed limit of e-bikes with Bafang M500 and M510 motors. This means you can ride much faster...

PearTune MSO 3.0 Tuning for Bafang M200, M300, M400 and M420 with UART With this tuning tool, the 25 km/h speed limit of your Bafang M200, M300, M400 & M420 e-bike can be completely switched off. So you can finally...

PearTune MSO 4.0 for Bafang M200, M410, M500, M510 with CAN Bus A tuning tool especially for e-bikes with Bafang M200, M410, M500, M510 drive systems with CAN Bus. In contrast to the conventional PearTune modules, the PearTune 4.0 offers...

PearTune MSO 4.0 for Sachs The PearTune MSO 4.0 is a tuning tool for Sachs e-bike motors (from model year 2020 onwards). The 25 km/h speed limit is completely removed so that the full potential of the drives can be...

sIMPLEk Pro for Bafang This is the SIMPLEk tuning module as a practical ready-made product. The sIMPLEk Pro is an inexpensive tuning tool that completely removes the speed limit of e-bikes with Bafang Max Drive motors - enabling you to...

SpeedBox 1.0 for Bafang (3 pin connector) M300 and M400 A recommended tuning solution for e-bikes with Bafang M300 or M400 drive system: The "SpeedBox" module is currently one of the few tuning tools for the popular Bafang MAX Drive...

SpeedBox 1.1 for Bafang 2020 e-bikes With this tuning tool, you can remove the 25 km/h limit and raise the speed limit significantly. This allows the Bafang motor to finally unfold its full potential. The result is a significant increase...

SpeedBox 1.2 for Bafang M300 & M400 (3-pin connector) In its range of functions, this tuning tool is limited to the absolute essentials: It removes the 25 km/h speed limit of Bafang e-bikes, so that you can ride much faster...

SpeedBox 1.3 for Bafang (4-pin connector) This tuning tool removes the 25 km/h speed limit of your e-bike allowing you to ride much faster with full motor support. After installation, you can switch on the tuning module at any time...

SpeedBox 3.0 B.Tuning for Bafang M300 / M400 (3-pin plug) This tuning module does not only remove the 25 km/h speed limit of your Bafang e-bike, you can even set the maximum speed to an individually desired value. In contrast...

SpeedBox 3.0 for Bafang M300 / M400 (3-pin plug) Eliminate the 25 km/h speed limit of your Bafang e-bike! With this tuning tool you can get the maximum out of your drive system! The SpeedBox 3.0 is a tuning chip...

SpeedBox 3.1 B.Tuning for Bafang (4-pin plug) Comfortable e-bike tuning with app! The SpeedBox 3.1 tuning module completely removes the 25 km/h speed limit of Bafang Max Drive M300, M400 and M420 e-bike motors with 4-pole plug-in connection. This allows...

SpeedBox 3.1 for Bafang M300, M400 & M420 (4-pin plug) This tuning module completely removes the 25 km/h speed limit from Bafang Max Drive M300, M400 and M420 e-bike motors with a 4-pin plug connection. There is even the option...

SpeedBox 3.2 B.Tuning for Bafang M200 / M410 / M500 / M510 User-friendly e-bike tuning with smartphone app! With this third-generation tuning module, you can not only remove the 25 km/h limit completely, you can also set the top speed to...

SpeedBox 3.2 for Bafang M200 / M410 / M500 / M510 Unleash the full power of your Bafang Max Drive M500, M510, M410 or M200 e-bike engine! With this third-generation tuning chip, the 25 km/h speed limit is not just lifted; you can...