Accessories

Crank puller for Bosch or other e-bike motors to loosen the pedal crank The crank puller (SHIMANO Octalink, ISIS and square) is optimally suited for e-bike motors and operable with a 22 mm open-end wrench. Application: First screw the crank...

Zefal crank guard red

Zefal crank guard black

Zefal crank guard grey

Zefal crank guard yellow

Miranda Delta 0 crank By inserting a shorter crank, the riding characteristics of a tuned e-bike can be improved considerably - especially with E-MTBs, unwanted ground contact can be avoided as far as possible when riding off-road. You could even...

Miranda Delta SH crank for Shimano E8000 Miranda Delta SH crank - Technical data Scope of delivery: Two cranks (i.e. one pair of cranks) with bolts Material: Cold forged aluminium Weight: 432 g (pair) Available arm lengths: 165 or 170...

Miranda Delta SH crank in silver for Shimano E8000 Miranda Delta SH crank - Technical data Scope of delivery: Two cranks (i.e. one pair of cranks) with bolts Material: Cold forged aluminium Weight: 432 g (pair) Available arm lengths: 150,...

SuperB: Spider for Bosch Gen2 For assembly and disassembly of the locking ring of the spider/chainring CNC machinedFor Bosch 2nd generation (Bosch Gen2)For 1/2 inch plug connection

XLC crankset for BOSCH e-bike systems CR-E01 XLC crankset for Bosch systems CR-E01 black, left & right 152 mm, 12 mm - Material: Aluminium 6061T6, cold forged - ISIS-Drive - Bosch Classic = M12 - Bosch Active/Performance = M15 -...

XLC crankset for BOSCH e-bike systems CR-E01 XLC crankset for Bosch systems CR-E01 black, left & right 152 mm, 15 mm - Material: Aluminium 6061T6, cold forged - ISIS-Drive - Bosch Classic = M12 - Bosch Active/Performance = M15 -...

XLC crankset for BOSCH e-bike systems CR-E01 XLC crankset for Bosch systems CR-E01 black, left & right 165 mm, 12 mm - Material: Aluminium 6061T6, cold forged - ISIS-Drive - Bosch Classic = M12 - Bosch Active/Performance = M15 -...

XLC crankset for BOSCH e-bike systems CR-E01 XLC crankset for Bosch systems CR-E01 black, left & right 165 mm, 15mm - Material: Aluminium 6061T6, cold forged - ISIS-Drive - Bosch Classic = M12 - Bosch Active/Performance = M15 - incl....

XLC crankset for BOSCH e-bike systems CR-E01 XLC crankset for Bosch systems CR-E01 black, left & right 170 mm, 12 mm - Material: Aluminium 6061T6, cold forged - ISIS-Drive - Bosch Classic = M12 - Bosch Active/Performance = M15 -...

Zefal crank guard blue

Zefal crank guard green

Zefal crank guard orange

Stronglight chainring 42T Bosch Gen4 DM aluminium

Stronglight chainring 42T Bosch Gen4 DM aluminium Chainring Stronglight Bosch Full Design Generation 4, e-bike, 42 teeth, direct mount, black. Compatible: Bosch 1st/3rd generation. Material: Zicral AL7075 Material: Aluminium Material: Steel Base colour: Black Brand: Stronglight Product line: For Bosch...

FIDLOCK VACUUM handlebar base Magnetic smartphone holder for the handlebar This smartphone holder has a nice low profile and can be easily attached to the handlebar of your e-bike / bike using (included) cable ties or clamps. The handlebar base...

FIDLOCK VACUUM phone case for iPhone 11 / iPhone XR Magnetic smartphone case The VACUUM phone case is a special smartphone case that is compatible with the holders ("bases") of the FIDLOCK VACUUM system. With this ingenious system, you can...

Spider for Bosch Gen3 This assembly tool from Cyclus Tools can be used to assemble and disassemble the locknut nut on the Bosch electric motor.For Bosch Gen3 motors, operable with a "Snap.in puller" or a 32mm open-end wrench. Important: This...

Spider Tool for Bosch Gen2 The Thadix Spider Tool assembly tool for Bosch Gen2 can be used to disassemble the locknut on the Bosch Gen2. Drive option: - 1/2" tools (torque wrench, ratchet, lever).