JUM-Ped

JUM-Ped Tool - Bosch Classic, BionX and Neodrives / Xion Tuning made easy

JUM-Ped

The JUM-Ped VMax Remover Tool is an excellent tool with which you can easily adjust, cancel or reset the speed limit of e-bikes with BionX drive, Bosch Classic motor or Neodrives / Xion motor at the touch of a button (depending on the e-bike motor). But see for yourself:

1) JUM-Ped for BionX drives:

Tuning an e-bike with the JUM-Ped VMax Remover is child's play and can be done in seconds - no PC or basic technical knowledge is required. Simply remove the shrink tubing from the original connectors (near the console on the handlebars) and disconnect the connector on the bike. Then simply connect the JUM ped to the plugs of the BionX e-bike and switch on the BionX console. Now you can start adjusting the speed of the BionX system!

The JUM-Ped has a clear LCD display; it is operated intuitively via 4 buttons. You now have the option of either selecting the desired speed from the menu or entering an individual value from 1 km/h upwards (please note that the maximum speed that can actually be achieved depends, among other things, on the performance of the system used). The speed limit will be lifted. If your e-bike has a throttle, you can also enter an individual value for the maximum speed. Further setting options can be found in the product description.

Important note: The Jum-Ped is basically limited to 1 BionX system - you can therefore optimise a maximum of 1 e-bike with it. However, you can make changes to this vehicle as often as you like.

Tip: Recently, there is also a JUM-Ped for 2 BionX systems.

2) JUM-Ped for BionX RC controllers:

In the meantime, we also have the JUM-Ped VMax Remover especially for BionX e-bikes with RC3 controller in our programme (suitable for bikes with or without DS3 display). This tool is also very easy to use and the tuning can be done within a few seconds - a PC or any basic technical knowledge is not required here either!

The JUM-Ped has a clear LCD display; it is operated intuitively via 4 buttons. After connecting the device, you can easily cancel the 25 km/h speed limit by simply pressing a button (the JUM-Ped does not remain on the vehicle). Further setting options can be found in the product description.

Important note: Each JUM ped is limited to 1 BionX system.

3) JUM-Ped for Bosch Gen1 motors:

The JUM-Ped for Bosch Classic Line motors is also really recommendable. Depending on the display, you can choose a JUM-Ped with Intuvia connector or a JUM-Ped with HMI connector. With the JUM-Ped you can not only unlock the speed limit (Vmax Remover function), but also make various other modifications to your Bosch Classic e-bike: For example, activate or deactivate the bike light, set the display either in kilometres or miles, read out and precisely set the wheel circumference (between 500 and 4000mm), activate or deactivate the starting aid (only with the Intuvia display) - or select the desired display language, namely German, English, Dutch, Danish, French, Italian or Spanish (only with the Intuvia display). So you have a powerful tool at your disposal!

The JUM-Ped also has a clear LCD display; it is operated intuitively via 4 buttons. You can find out how to install the JUM-Ped for Bosch Classic Line motors and how to make further settings in the product description.

Important note: The JUM-Ped tool is also limited to 1 Bosch system - so you can really only make 1 Bosch Classic e-bike faster at a time with the tuning tool. If you then want to optimise another Bosch Classic bike, you must first disconnect the coupled JUM-Ped again.

4) JUM ped for Neodrives and Xion motors:

The JUM-Ped for Neodrives and Xion motors is a comfortable software tuning product. The maximum speed can be set from 15 - 37 km/h (depending on the manufacturer's software version, only 32 km/h may be possible). The push assistance can be set from 1 - 11 km/h (depending on the manufacturer's software version, a maximum of only 6 km/h may be possible). The assistance levels are individually adjustable from 1 to 5 (50 - 300%). In addition, you can set the default assistance level after the start. The agility can also be set from 1-4 (responsiveness). The wheel circumference can also be adjusted to the millimetre. There are also many other features. Of course, with the JUM-Ped for Neodrives and Xion motors, the initial configuration can be restored if required!

Important note: The JUM-Ped tool is limited to 1 Neodrives / Xion system - so you can only optimise 1 bike at a time with the tuning tool.

JUM-Ped for Gen1 motors:

Tuning Tool for Bosch Classic Line motors with Intuvia Display
Tuning Tool for Bosch Classic Line motors with HMI Display

JUM-Ped for BionX motors:

Vmax Remover for BionX RC3/DS3
Vmax Remover for BionX

Vmax Remover for BionX drives (battery version)

Vmax Remover for 2 BionX drives

JUM-Ped for Neodrives and Xion motors:

JUM-Ped for Neodrives & Xion motors

JUM-Ped

Tuning Tool for Bosch Classic Line motors with Intuvia Display

Vmax Remover for Bion

JUM-Ped for Neodrives & Xion motors

Pre-loader