MBIQ-P Plug-In for AEG / BAFANG / Giant / Yamaha (3pin)
TYPE: Yamaha Powerdrive, Yamaka Syncdrive
VENDOR: MBIQ
MBIQ-P Plug-In Solution for AEG / Bafang / Giant / Yamaha (3pin)
The MBIQ-P is a microcontroller-based tuning tool for e-bikes with AEG, Bafang, Giant or Yamaha mid-mounted motors with 3-pole connectors. This tuning tool is limited in its range of functions to the absolutely essential, namely the removal of the 25 km/h speed limit. Finally use the full potential of your e-bike drive and ride much faster with full motor support!
Since the MBIQ-P is a practical plug-in solution, installation is easy: you basically only have to integrate the tool into the line of the existing speed sensor. This is uncomplicated because the MBIQ-P is very compact and uses the same connectors as the existing sensor cable. However, please note: Often the plug connection of the sensor is located in the engine compartment. In this case, it may be necessary to loosen the engine block to gain access to the sensor connector. The original sensor connector must then simply be disconnected and the MBIQ-P inserted in between.
Functional principle
After installation, the MBIQ-P analyses and processes the current speed profile and, if tuning is activated, outputs manipulated values. More precisely, speeds above 25 km/h are blocked for the engine firmware. This effectively tricks the 25 km/h speed limit so that you can ride much faster with full motor support.
Please note that due to this functional principle, your e-bike display will no longer show the correct speed at speeds above 25 km/h when tuning is active. The speed shown on the display will then always remain ≤ 25 km/h.
The evaluation of the motor software is not affected by the manipulated values.
Three operating modes
The MBIQ-P is programmable by the customer. You have the option of activating three different operating modes by means of certain wheel movements when starting up the bike (a PC or smartphone are not necessary for this).
-Tuning permanently activated (speed limit is permanently removed, no correct speed indication in the display from approx. 25 km/h).
-Tuning permanently deactivated (speed limit is not removed, motor support is normal up to 25 km/h, the display shows real speed).
-Tuning activation after switch-on condition (tuning is activated by the magnet being in front of the sensor for at least 4 seconds during start-up, otherwise tuning is deactivated).
MBIQ-P for AEG / BAFANG / Giant / Yamaha (3pin) - data at a glance
-Speed limit is completely cancelled.
-Programmable by the customer (without additional devices).
-Tuning can be switched on and off.
-Connection type: Plug-in solution, the tool is plugged in between engine and sensor.
-The MBIQ-P requires very little installation space.
-Display: When tuning is active, manipulated values from approx. 25 km/h.
-The tool is completely maintenance-free.
-No separate power supply/battery required.
-"Anti-Tuning Ready".
-Weight: Only approx. 5g.
-Made in Germany.
MBIQ-P Plug-In Solution for AEG / BAFANG / Giant / Yamaha (3.pol.) - Compatibility
The MBIQ-P is compatible to E-Bikes with Giant and Yamaha mid-motors with the same 3-pin connector system.
-Yamaha: PW-SE / ST / TE / X / X2
-Giant SyncDrive...
-AEG ...Drive
-Bafang
The MBIQ-P is compatible with the common motor firmwares of the respective manufacturers.
Important: Please check sensor & connector for compatibility in advance.
Delivery time, Shipping costs, Minimum order value und Payment methods:
Delivery time
Delivery time is 1-8 business days within Germany. Postal delivery time outside Germany may take longer.
Shipping area
We ship to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.
For shipping to Germany please use our german shop.
For a solution to Switzerland and Liechtenstein please see here.
We do not ship to the USA, France, Canada (including all overseas territories) and generally outside the EU.
Shipping costs
The shipping costs for Germany are 3,50 Euro. The shipping costs are waived from an order value of 180 Euro. For countries within the EU the shipping costs are 9,90 Euro. The shipping costs are waived from an order value of 300 Euro. We ask you to cover the cost of any return shipment yourself. Please note that customs fees may apply in third countries outside the European Union.
Minimum order value
The minimum order value is 25 Euro. Only from this amount you can use prepayment or PayPal and bank transfer as payment methods.
Maximum order value
The maximum order value for orders outside the EU is 1.000 Euro. The maximum order value within the EU is 12.500 Euro.
Payment in advance bank transfer
Please transfer the total amount with your order number to our account which you received in the confirmation email. Please note that bank transfers within Germany can take up to three working days. Transfers from abroad, especially from Austria and Switzerland, usually arrive very quickly. From other countries, transfers can take a little longer on average.
Payment in advance Paypal
At the end of the order process you will be redirected to the page of Paypal. There you can initiate your payment. As soon as the Paypal transaction is completed, the status of your order will change in the store. The goods will then be shipped as soon as possible.
Comparison of e-bike tuning products
Type |
Software | (Module) Software (Controller) |
Box | Module | Module | Module | Module | (Kit) Module / Sensor |
(Kit) Module / Dongle |
Dongle |
| Range of functions | ***** | ***** | * | ***** | **** | *** | *** | *** | *** / ** | * |
Easy installation of the tuning |
***** | ***** | **** | ** | ** | ** | ** | ** / * | ** / * | * |
Invisible after installation |
***** | ***** | * | ***** | ***** | ***** | ***** | ***** | ***** / **** | **** |
Switching on / off while riding |
* Gerät |
***** Gerät, Display |
* Box |
***** App, Display |
***** Display |
***** Display |
***** (App), Display |
*** Display, Magnet |
***** / **** Display / Dongle |
**** Dongle, (Licht) |
No more tuning Module at the bike |
***** | ***** | ***** | * | * | * | * | * | * / **** | **** |
Invisible dismantling |
***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** / *** | *** |
Easy dismantling |
***** | ***** | ***** | ** | ** | ** | ** | ** / * | ** / * | * |
Correct display of km/h |
***** Display |
***** Display |
* | ***** Display, App |
***** Display |
***** Display |
***** Display, App |
* | **** Display |
* |
Dethrottling |
***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** |
Reducing |
* | ***** | * | ***** | ***** | ***** | ***** | * | * | * |
Price range in euros |
169 to 209 |
189 to 299 | 149 to 154 | 219 to 239 |
159 to 179 | 139 to 259 |
139 to 309 |
89 to 199 |
89 to 209 |
139 to 159 |
Important: Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads. Legally permissible use is therefore only possible on private property or - if permitted - in competitions. Driving an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license as well as driving without insurance coverage. Tuning measures on the e-bike and e-scooter can lead to a loss of warranty rights and manufacturer warranties. In addition, tuning measures can lead to a loss of insurance coverage and accident victim assistance benefits in the event of accidents. The e-bike (or e-scooter) modified by tuning measures is exposed to an additional load due to the higher speed, which can lead to safety risks.
