VOLspeed V4 for Giant Syncdrive Pro2 / Sport2

VOLspeed V4 for Giant Syncdrive Pro2 / Sport2

Attention: This tuning module is NOT compatible with the Smart Gateway software version 202 403 14000 or newer!

Therefore, DO NOT update the software of your GIANT e-bike drive system!

The update could massively impair the function of the tuning and / or the e-bike.

We also advise against using the Ride Control app, as the app could force an automatic software update!

This tuning tool for GIANT Syncdrive Pro2 motors, which were first used in 2022 Trance and Reign models, has a wide range of functions (also compatible with Syncdrive Sport2). First and foremost, of course, is the removal of the 25 km/h speed limit. There is the option to set the maximum speed to a desired value between 25 and 45 km/h.

A unique feature of the VOLspeed modules is the so-called "dynamic mode": This mode causes a softer deceleration behaviour, so that the motor does not stop so abruptly when reaching the set maximum speed. This leads to a much more pleasant driving experience. The option to adjust the wheel circumference is also interesting, as this can improve the accuracy of the speed display and the distance measurement.

The tuning module can be operated comfortably via the control buttons on the display, or alternatively via the Ridecontrol app. A display is therefore not mandatory for switching the VOLspeed tuning on and off. A display is basically only needed to change settings.

New Features

A new feature of the VOLspeed V4 is the possibility to set an individual activation code to prevent unauthorised access to the tuning. Another new feature is the automatic initialisation, so that the tool is immediately ready for use after installation (Plug & Ride).

Installation

VOLspeed V4 is a tuning module that must be permanently connected to the engine. No cables need to be damaged or modified. After installation, the module is not visible from the outside.

Installation is relatively simple, as the electrical connections on the new Pro2 engine are no longer located at the top of the engine, as is typical for Yamaha, but on the side. In addition, the cables are no longer routed out; the sockets are now located directly in the motor housing. This makes the bike's wiring much tidier, and there is enough space under the side cover to store the tuning module.

If necessary, the VOLspeed V4 Tuning Module can be removed again at any time to restore the e-bike to its original condition.

VOLspeed for GIANT Syncdrive PRO2 / Sport2 V4 - Advantages at a glance

-Cancellation of the 25 km/h speed limit.

-The maximum speed can be set to an individual value via the arrow keys (from 25 km/h to 45 km/h). This has the advantage that by moderately increasing the speed limit, e.g. to 33 km/h, a still very sporty riding style can be realised with quite low battery consumption. The last set value is saved.

-Correct display of current speed, distance travelled and average speed.

-New: Plug & Ride - Automatic initialisation, the module is immediately ready for operation after installation.

-Setting of a softer deceleration behaviour possible (dynamic mode). In this mode, the abrupt stopping of the motor support when the set maximum speed is reached is significantly softened.

-The tuning can be switched on or off via the control unit at the handlebars (the tuning is initially always off after switching on the bike).

-New: An individual activation code can be set. This can be used to protect the module from unauthorised access.

-Adjustable wheel circumference (+/- 10%), which improves the accuracy of the speed display and distance measurement.

-Correct total mileage, even after removing the VOLspeed V4 module, as the kilometres in the engine control unit are tracked by the module.

VOLspeed for GIANT Syncdrive PRO2 / Sport2 V4 - Compatibility

-Compatible with all e-bikes with GIANT Syncdrive Pro 2 and Syncdrive Sport 2 drive systems from model year 2022.

-Compatible with Displays Ridedash Plus, Ridedash Plus 2, Ridedash Evo & Ridedash 2 in 1.

-Compatible with control units GO+, Ergo, Ergo 2 & Ergo 3.

Notes regarding compatibility:

-This VOLspeed module is only compatible with the motor listed above if it supports up to 25 km/h ex-works. The module does not work with GIANT motors that only support up to 20 km/h (youth e-bikes) or up to 45 km/h (S-pedelecs).

-Not compatible with original Yamaha motors (PW, PW-X, PW-X2, PW-X3, PW-SE, PW-TE, PW-ST) and GIANT Syncdrive Sport and Pro motors.

-To be able to use all functions of the VOLspeed Tuning Module, the display of speed and total kilometres is required. 

Attention: This tuning module is NOT compatible with the Smart Gateway software version 202 403 14000 or newer!

Therefore, DO NOT update the software of your GIANT e-bike drive system!

The update could massively impair the function of the tuning and / or the e-bike.

We also advise against using the Ride Control app, as the app could force an automatic software update!

Scope of delivery

-VOLspeed Tuning Module (Version V4)

-Installation and operating instructions

VOLspeed V4 for GIANT Syncdrive PRO2 - Technical data

Module dimensions: 37 x 19 x 9 mm

Weight only 0,025 kg

Cable length approx. 140 mm

Power consumption 0.1 W

Supply voltage 5VDC

Tools required for installation

The following tools are required for installation in a Reign E+ e-bike:

Allen key 2 mm / 2.5 mm / 8 mm