VOLspeed V2 for Bosch Smart System (BES3)
TYPE: Bosch Smart System
VENDOR: VOLspeed
VOLspeed V2 for Bosch Smart System (BES3)
This practical tuning module impresses with numerous optimization options and is considered extremely reliable. Compared to the previous model, the new VOLspeed V2 is also compatible with the new Bosch Smart System software updates:
Compatible with Bosch Smart System software up to 13.13.1 & LED Remote / Purion 200 / System Controller software version 13.12.1. Nevertheless, please do not carry out any further software updates to the drive system. This may impair the function of the tuning.
Also important: The VOLspeed for Bosch Smart System is one of the tuning solutions that generate the fewest errors on the new Bosch Smart System. We therefore give it a special purchase recommendation!
Brand new: Now with optimised connectors! Until now, the connectors of the VOLspeed modules for Bosch Smart were produced using an additive manufacturing process. To improve stability and strength, injection-moulded parts are now used; and the front part of the sockets is now made of metal. All this while maintaining the same small dimensions.
The core function of the tuning module is to remove the 25 km/h speed limit so that you can ride much faster with motor assistance. There is even the option to set the maximum assisted speed to a desired value (up to 45 km/h). The default value is 32 km/h.
Please note: VOLspeed recommends setting a speed limit of maximum 35 km/h to prevent the manipulation detection from being triggered (error 504). A higher limit does not necessarily lead to an error, but the probability is significantly increased.
A special feature of the VOLspeed tuning modules is the so-called “dynamic mode”. In this mode, which can be set as an option, the motor support no longer stops so abruptly when the maximum speed is reached, making riding much more relaxed.
All settings are made conveniently using the control buttons on the e-bike, so you don't need a PC or smartphone.
The VOLspeed V2 is a module that must be connected to the e-bike motor. For installation, the motor cover must be temporarily removed. After installation, the module is not visible from the outside. No cables need to be damaged or modified. Once plugged in, the module is immediately ready for use and you do not need to carry out any complex calibration. The module's electronics are securely encapsulated in the housing and therefore well protected against moisture.
An installation example on a Cube Stereo Hybrid E-Bike (model year 2022) can be found “here”.
Please note that the installation process may differ slightly for other e-bike models.
Important note: When tuning is activated, the speed shown on the e-bike display is too low from approx. 21 km/h onwards; the distance measured is also too short. This means that the mileage after using the VOLspeed tuning no longer corresponds to the real values and is lower.
Important note: To be on the safe side, the maximum speed limit should be set to 35 km/h at the most. This can almost certainly prevent the anti-tuning software from recognising the tuning (error 504).
VOLspeed V2 for Bosch Smart System (BES3) - Features at a glance:
-Unlocking: 25 km/h speed limit is removed.
-The maximum speed can be freely adjusted from 25 km/h to 45 km/h. The setting is made using the plus and minus buttons, whereby the last set value is saved. Please note that the maximum speed should not be set higher than 35 km/h, as otherwise the Bosch anti-tuning software could kick in.
-The tuning can be switched on and off at any time using the control buttons on the e-bike (after switching on the e-bike, the tuning is initially always off). Depending on the control unit and display, you must use the buttons to change the assistance level, e.g. the + & - buttons (sequence - + - +). After switching on, the set speed limit is displayed for 5 seconds.
-Dynamic mode can be set: In this optional mode, the motor assistance no longer stops so abruptly when the set max speed is reached. This leads to a reduced “wall effect” and therefore to a more pleasant ride.
-Automatic initialization: After installation, the module is immediately ready for use; no time-consuming calibration is required.
-The VOLspeed V2 module does not require its own battery.
-Individual activation code. You can set an individual code with which the tuning can be activated using the control buttons on the e-bike.
-For e-bikes without a display, you can also use the Bosch Flow app to display the module settings. But please do not perform software updates with the app!
Note: The manufacturer VOLspeed generally advises against Bosch updates. If the Bosch Flow app reports an update, you should not install the update, as the tuning module could then be detected by the tamper detection system. It is also possible that the tuning will no longer work after an update. Automatic updates should always be disabled in the Flow app.
VOLspeed V2 for Bosch Smart - Compatibility:
The VOLspeed V2 tuning module is only compatible with Bosch Smart System e-bike drives (sometimes also referred to as “BES3” or “Bosch Gen4 2022”), which have a factory-set motor support of up to 25 km/h.
Important: Compatible with Bosch Smart System motor software until 13.13.1 and LED-Remote / Purion 200 & System Controller software version 13.12.1. Nevertheless, please do not carry out any further software updates. This may impair the function of the tuning!
Compatibility is only guaranteed with the following drive units used on Bosch Smart System E-Bikes:
-Bosch Active Line (Plus) Gen3 from MY2023 Smart System (until software version 13.13.1)
-Bosch Performance Line Gen3 from MY2023 Smart System (until software version 13.13.1)
-Bosch Performance Line CX Gen4 from MY2022 Smart System (until software version 13.13.1)
-Bosch Cargo Line from MY2022 Smart System (until software version 13.13.1)
-Bosch Performance Line CX Race Smart System
Note: Unless otherwise specified, older software versions are also compatible.
(Note on Bosch SX motors: Whether this tuning module is also compatible with Bosch SX motors cannot be said with certainty at the moment. In most cases, Bosch SX e-bikes are equipped with a rim magnet - if this is the case, compatibility is definitely NOT given.
As far as Bosch SX e-bikes WITHOUT a rim magnet are concerned, the VOLspeed V2 should actually work - but we cannot give a 100% guarantee at the moment.)
Only compatible with the following display types / control units:
-Purion 200 (until software version 13.12.1)
-LED Remote (until software version 13.12.1)
-System Controller (from software version 13.12.1)
-Intuvia 100 (up to software version 1.1.56)
-Kiox 300 (up to software version 13.14.0)
-Kiox 500 (up to software version 13.14.0)
-Mini Remote (up to software version 1.1.20)
-Compatible with Connect module (up to software version 12.89.1)
-Compatible with Power Tube battery (up to software version 13.5.3)
IMPORTANT:
-Not compatible with Bosch Smart System e-bikes with ABS system!
-Not compatible with Bosch Smart System e-bikes with rim magnet (magnet on the valve). You can recognize these bikes by the fact that they have a large magnet on the valve on the rear rim (= rim magnet).
-The manufacturers expressly advise against Bosch Smart System software updates. It is possible that the tuning is no longer compatible after an update; in the worst case, the Bosch anti-tuning software could even kick in.
In this selection guide you can see which displays/controls are compatible with this VOLspeed V2 for Bosch Smart System (right field only):
If your Bosch e-bike is equipped with one of the displays / control units from the left field, it is not a Bosch Smart System e-bike. In this case, we recommend the VOLspeed for Bosch Gen2, Gen3 & Gen4.
Tip: Bosch Smart System e-bikes (BES3) can be easily recognised by the charging cable plug, among other things.
SQUARE plug = Bosch Smart System BES3 (Gen4) + Bosch Gen5:
ROUND plug = Bosch Gen2, Gen3 & Gen4:
If your Bosch e-bike charging cable has a square plug (as shown above), you have selected the correct tuning module (provided the bike does not have ABS or a rim magnet). If your Bosch e-bike does not have either connector, you either do NOT have a Bosch e-bike or an e-bike with the old Gen1 drive (Classic Line).
Scope of delivery
VOLspeed V2 tuning module
Installation and operating instructions
2 cable ties
Technical data:
Housing dimensions: 37 x 19 x 9mm
Cable length approx. 140mm
Weight: 0.017kg
Power consumption: 0.2W
Supply voltage: 12VD
WEEE reg. no. DE35476192
Delivery time, Shipping costs, Minimum order value und Payment methods:
Delivery time
Delivery time is 1-8 business days within Germany. Postal delivery time outside Germany may take longer.
Shipping area
We ship to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.
For shipping to Germany please use our german shop.
For a solution to Switzerland and Liechtenstein please see here.
We do not ship to the USA, France, Canada (including all overseas territories) and generally outside the EU.
Shipping costs
The shipping costs for Germany are 3,50 Euro. The shipping costs are waived from an order value of 180 Euro. For countries within the EU the shipping costs are 9,90 Euro. The shipping costs are waived from an order value of 300 Euro. We ask you to cover the cost of any return shipment yourself. Please note that customs fees may apply in third countries outside the European Union.
Minimum order value
The minimum order value is 25 Euro. Only from this amount you can use prepayment or PayPal and bank transfer as payment methods.
Maximum order value
The maximum order value for orders outside the EU is 1.000 Euro. The maximum order value within the EU is 12.500 Euro.
Payment in advance bank transfer
Please transfer the total amount with your order number to our account which you received in the confirmation email. Please note that bank transfers within Germany can take up to three working days. Transfers from abroad, especially from Austria and Switzerland, usually arrive very quickly. From other countries, transfers can take a little longer on average.
Payment in advance Paypal
At the end of the order process you will be redirected to the page of Paypal. There you can initiate your payment. As soon as the Paypal transaction is completed, the status of your order will change in the store. The goods will then be shipped as soon as possible.
Comparison of e-bike tuning products
Type |
Software | (Module) Software (Controller) |
Box | Module | Module | Module | Module | (Kit) Module / Sensor |
(Kit) Module / Dongle |
Dongle |
Range of functions | ***** | ***** | * | ***** | **** | *** | *** | *** | *** / ** | * |
Easy installation of the tuning |
***** | ***** | **** | ** | ** | ** | ** | ** / * | ** / * | * |
Invisible after installation |
***** | ***** | * | ***** | ***** | ***** | ***** | ***** | ***** / **** | **** |
Switching on / off while riding |
* Gerät |
***** Gerät, Display |
* Box |
***** App, Display |
***** Display |
***** Display |
***** (App), Display |
*** Display, Magnet |
***** / **** Display / Dongle |
**** Dongle, (Licht) |
No more tuning Module at the bike |
***** | ***** | ***** | * | * | * | * | * | * / **** | **** |
Invisible dismantling |
***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** / *** | *** |
Easy dismantling |
***** | ***** | ***** | ** | ** | ** | ** | ** / * | ** / * | * |
Correct display of km/h |
***** Display |
***** Display |
* | ***** Display, App |
***** Display |
***** Display |
***** Display, App |
* | **** Display |
* |
Dethrottling |
***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** |
Reducing |
* | ***** | * | ***** | ***** | ***** | ***** | * | * | * |
Price range in euros |
169 to 209 |
189 to 299 | 149 to 154 | 219 to 239 |
159 to 179 | 139 to 259 |
139 to 309 |
89 to 199 |
89 to 209 |
139 to 159 |
Important: Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads. Legally permissible use is therefore only possible on private property or - if permitted - in competitions. Driving an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license as well as driving without insurance coverage. Tuning measures on the e-bike and e-scooter can lead to a loss of warranty rights and manufacturer warranties. In addition, tuning measures can lead to a loss of insurance coverage and accident victim assistance benefits in the event of accidents. The e-bike (or e-scooter) modified by tuning measures is exposed to an additional load due to the higher speed, which can lead to safety risks.