SpeedBox 3.0 for Bosch 2020

SpeedBox 3.0 for Bosch 2020 (Gen2 / Gen3 / Gen4)

Tip: If you install the SpeedBox 3.0 in a brand new Bosch e-bike, you must ride the bike for at least 10 km before switching on the SpeedBox for the first time.

You have a new e-bike with Bosch motor (Gen4 - MY20) and finally want to ride without limits? If so, the brand new SpeedBox 3.0 tuning chip for Bosch is the perfect solution!

The SpeedBox 3.0 doesn't just lift the speed limit of your Bosch drive - with this smart third-generation chip, you now even have the option of setting the speed limit yourself.

Correct speed on the display

Even with active tuning, the e-bike display still shows the correct speed. This also applies to all other data such as maximum and average speed, daily distance and range - by the way, thanks to improved software, the mileage counter now shows even more accurate values than before.

As already mentioned, the SpeedBox 3.0 even has a brand new feature: you now have the possibility to set the maximum speed to an individual value.

The SpeedBox 3.0 has been developed from scratch - in such a way that it is able to outsmart Bosch's "tuning detection software". For this reason, this tuning tool works not only with the old Bosch drives, but also with the Bosch 2020 motors of the very latest generation (see below for exact compatibility).

SpeedBox 3.0: A high-quality product

Only high-quality components from leading global manufacturers are used in the production of the SpeedBox 3.0. The box not only looks attractive, it is also extremely robust and waterproof. The processor of the tuning chip is even certified for the automotive industry. Each SpeedBox is tested several times for correct functionality during and after production.

This tuning tool is manufactured in the Czech Republic.

Tuning can be switched on and off

You have the option of conveniently activating the tuning via the WALK button on the display. As soon as the WALK button is pressed, the display briefly shows 9.9 km/h. This signals that the tuning has been activated and that you can ride at unlimited speed (theoretically).

As soon as you press the WALK button again, the SpeedBox 3.0 chip is switched off again. The display shows 2.5 km/h to indicate that the tuning has been deactivated and the maximum assisted speed is 25 km/h again. The e-bike will then function exactly as it did before the SpeedBox 3.0 was installed.

If your e-bike does not have a WALK button, you can simply use the key combination + - + - to switch the SpeedBox on or off.

Setting the maximum speed

To set the top speed, the mode must be changed: Turbo - EMTB - Tour - Eco - Tour - EMTB - Turbo. Subsequently, the current speed limit is displayed.

If you want to change the current maximum speed, briefly press the WALK button or turn the rear wheel 360°. A displayed speed of 1.5 km/h corresponds to a maximum speed of 15 km/h, a displayed speed of 3.0 km/h corresponds to a maximum speed of 30 km/h, 9.9 km/h stands for unlimited speed, and so on. After five seconds of inactivity, the last stored limit is saved.

If you have a Bosch e-bike motor of the 4th generation (from year of manufacture 2020), you must leave the e-bike switched on after completing the ride until a constant speed of 0.0 km/h is shown in the display. Within this time, the display will show the remaining time in minutes. After that, the e-bike can be switched off.

Installation of the SpeedBox 3.0 for Bosch

Since the SpeedBox 3.0 chip is connected by means of special coloured plugs which are provided with a key for correct connection, the installation of the SpeedBox 3.0 is simple. Customers can do this themselves. By the way, the SpeedBox can be removed just as easily as it can be attached.

Notes:

-If you use the SpeedBox 3.0 with 4th generation Bosch motors (from model year 2020), you must leave the e-bike switched on after the end of the ride until the display shows a constant speed of 0.0 km/h. This prevents detection by the Bosch anti-tuning software.

-If you install the chip in a brand new e-bike, you must first ride 10 kilometres before starting the chip for the first time.

SpeedBox 3.0 for Bosch - Compatibility

This tuning chip is compatible with Bosch e-bike motors of the 2nd to the 4th generation:

-Bosch Active Line
-Bosch Active Line Plus
-Bosch Performance Line
-Bosch Performance Line CX
-Bosch Performance Line Speed
-Bosch Cargo Line

Compatible with the displays: Intuvia, Purion, Nyon, Cobi & Kiox.

Even compatible with Bosch motors of the 4th generation (year of manufacture 2020/2021).

The SpeedBox 3 is also compatible with Bosch Gen2 to Gen4 e-bikes equipped with Bosch "Anti-Tuning Software".

-Not compatible with the SpeedBox app.

-NOT compatible with Bosch Smart System / BES3 e-bikes (almost all Bosch e-bikes from 2023 onwards are equipped with the Smart System drive).

You can recognise Bosch Smart System e-bikes by the following features:

- The e-bike is equipped with Kiox 300, Intuvia 100 or Purion 200 displays.
- The e-bike is equipped with the LED Remote, Mini Remote or System Controller control units.
- The e-bike is compatible with the Bosch eBike Flow app.

 

---

 

Tip: Bosch Smart System e-bikes (BES3) can be easily recognised by the charging cable plug, among other things.

SQUARE plug = Bosch Smart System BES3 (Gen4) + Bosch Gen5:

ROUND plug = Bosch Gen2, Gen3 & Gen4:

If your Bosch e-bike charging cable has a round plug (as shown above), you have selected the correct tuning module (provided the bike does not have ABS). If your Bosch e-bike does not have either connector, you either do NOT have a Bosch e-bike or an e-bike with the old Gen1 drive (Classic Line).