New
PRE ORDER
OUT STOCK

SpeedBox 3.0 for Yamaha PW-SE, PW-X, PW-TE, PW-X2, PW-ST

TYPE: Yamaha Powerdrive

VENDOR: Speedbox

209,00 €

PRODUCT INFORMATION
Payment & Shipment
Comparison
Customer reviews
Warnings
PRODUCT INFORMATION

SpeedBox 3.0 for Yamaha PW-SE, PW-X, PW-TE, PW-X2, PW-ST

This smart 3rd generation tuning chip not only removes the 25 km/h speed limit of your Yamaha e-bike, you can even set the maximum supported speed yourself. All this with correct data on the display! The operation is done comfortably via the control buttons of your e-bike, you don't need a PC or smartphone.


The advantages of the SpeedBox 3.0 module at a glance:

-Removal of the 25 km/h speed limit.

-Maximum speed individually adjustable: The maximum speed can be adjusted by switching the mode three levels down and then three levels up (---+++) - after which the current speed limit is displayed (2.0 km/h corresponds to 20 km/h, 3.0 km/h corresponds to 30 km/h, etc.). To change the speed limit, briefly press the light button or turn the rear wheel 360°. The last speed limit displayed will be saved after 5 seconds of inactivity.

-Correct values in the display: Even with tuning switched on, the e-bike display shows correct data, e.g. top speed, average speed, range, etc.

-Tuning can be switched on and off: You can activate/deactivate the tuning at any time using the control buttons on the e-bike display. After pressing the light button or the combination ↑↓↑↓ (alternatively +-+-), the display will briefly show 99 km/h - this signals that the tuning has been activated and the speed limit has been lifted. Pressing the light button again deactivates the tuning and the max. speed ends again at 25 km/h (to confirm this, the display briefly shows a value of 25 km/h). Now the e-bike works again as if no tuning module was installed.

-The SpeedBox 3.0 module does not need its own battery.


Installation

SpeedBox 3.0 is a module or chip that must be connected to the motor. To do this, you must first gain access to the corresponding connections on the motor (remove the battery beforehand if possible). Then disconnect the connectors on the cable from the motor to the speed sensor and from the motor to the display. Then simply connect the SpeedBox to the disconnected connectors (the connection is made via coloured plugs that have been equipped with a key for correct connection), and return the bike to its original state. After the e-bike has been switched on, you can activate the tuning.

If you want to restore the e-bike to its original condition, the chip can be uninstalled at any time.

Important: If you want to install the SpeedBox 3.0 in a brand new Yamaha e-bike, you must first ride the bike for at least 1 km before starting the chip for the first time.

Tip: If you want even more comfort when tuning, you can also purchase this SpeedBox 3.0 in a "B.Tuning" version that is compatible with the practical SpeedBox app. This allows you to benefit from various additional features.


SpeedBox 3.0 for Yamaha PW-SE, PW-X, PW-TE, PW-X2, PW-ST - Compatibility

This tuning module is compatible with the following Yamaha e-bike drive systems:

-PW-SE

-PW-X

-PW-TE

-PW-X2

-PW-ST until (including) 2021


Not compatible with:

-Yamaha Moro 07

-Yamaha CrossCore RC

-Yamaha Wabash RT

-Yamaha Booster / Booster Easy

-Yamaha PW-X3

-Yamaha UrbanRush

-CrossCore

-CrossConnect

-Wabash

YDX-Torc

-YDX-Moro

-YDX-Moro Pro

-YPJ

-PW-ST since 2022

-SpeedBox App

Payment & Shipment

Delivery time, Shipping costs, Minimum order value und Payment methods:

Delivery time

Delivery time is 1-8 business days within Germany. Postal delivery time outside Germany may take longer.

Shipping area

We ship to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.

For shipping to Germany please use our german shop.

For a solution to Switzerland and Liechtenstein please see here.

We do not ship to the USA, France, Canada (including all overseas territories) and generally outside the EU.

Shipping costs

The shipping costs for Germany are 3,50 Euro. The shipping costs are waived from an order value of 180 Euro. For countries within the EU the shipping costs are 9,90 Euro. The shipping costs are waived from an order value of 300 Euro. We ask you to cover the cost of any return shipment yourself. Please note that customs fees may apply in third countries outside the European Union.

Minimum order value

The minimum order value is 25 Euro. Only from this amount you can use prepayment or PayPal and bank transfer as payment methods.

Maximum order value

The maximum order value for orders outside the EU is 1.000 Euro. The maximum order value within the EU is 12.500 Euro.

Payment in advance bank transfer

Please transfer the total amount with your order number to our account which you received in the confirmation email. Please note that bank transfers within Germany can take up to three working days. Transfers from abroad, especially from Austria and Switzerland, usually arrive very quickly. From other countries, transfers can take a little longer on average.

Payment in advance Paypal

At the end of the order process you will be redirected to the page of Paypal. There you can initiate your payment. As soon as the Paypal transaction is completed, the status of your order will change in the store. The goods will then be shipped as soon as possible.

Comparison

Comparison of e-bike tuning products

 

JUM-Ped

MTT

Badass Box

RedPed / BluePed /
GreenPed

VOLspeed

PearTune

SpeedBox

MBIQ

sIMPLEk

Sx2 Dongle

Type

Software (Module)
Software
(Controller)
Box Module Module Module Module (Kit)
Module /
Sensor
(Kit)
Module /
Dongle
Dongle
Range of functions ***** ***** * ***** **** *** *** *** *** / ** *

Easy installation of the tuning

***** ***** **** ** ** ** ** ** / * ** / * *

Invisible after installation

***** ***** * ***** ***** ***** ***** ***** ***** / **** ****

Switching on / off while riding

*
Gerät
*****
Gerät, Display
*
Box
*****
App, Display
*****
Display
*****
Display
*****
(App), Display
***
Display, Magnet
***** / ****
Display /
Dongle
****
Dongle, (Licht)

No more tuning Module at the bike

***** ***** ***** * * * * * * / **** ****

Invisible dismantling

***** ***** ***** ***** ***** ***** ***** ***** ***** / *** ***

Easy dismantling

***** ***** ***** ** ** ** ** ** / * ** / * *

Correct display of km/h

*****
Display
*****
Display
* *****
Display, App
*****
Display
*****
Display
*****
Display, App
* ****
Display
*

Dethrottling

***** ***** ***** ***** ***** ***** ***** ***** ***** *****

Reducing

* ***** * ***** ***** ***** ***** * * *

Price range in euros

169 to
209
189 to 299 149 to 154 219 to
239
159 to 179 139 to
259
139 to
309
89 to
199
89 to
209
139 to
159

Legend

Customer reviews
Warnings

Important: Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads. Legally permissible use is therefore only possible on private property or - if permitted - in competitions. Driving an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license as well as driving without insurance coverage. Tuning measures on the e-bike and e-scooter can lead to a loss of warranty rights and manufacturer warranties. In addition, tuning measures can lead to a loss of insurance coverage and accident victim assistance benefits in the event of accidents. The e-bike (or e-scooter) modified by tuning measures is exposed to an additional load due to the higher speed, which can lead to safety risks.

SpeedBox 3.0 for Yamaha PW-SE, PW-X, PW-TE, PW-X2, PW-ST

SpeedBox 3.0 for Yamaha PW-SE, PW-X, PW-TE, PW-X2, PW-ST

209,00 €
Pre-loader