SpeedBox 1.2 for Bafang M300 & M400 (3-pin connector)
TYPE: Bafang
VENDOR: Speedbox
SpeedBox 1.2 for Bafang M300 & M400 (3-pin connector)
In its range of functions, this tuning tool is limited to the absolute essentials: It removes the 25 km/h speed limit of Bafang e-bikes, so that you can ride much faster with full motor support! There are no other features.
After installation, the tuning can be activated at any time using the light button on your e-bike. A short flash of the light symbol indicates that the SpeedBox has been switched on. You can deactivate the tuning by pressing the light button again.
Our tip: By attaching the special light cable for Bafang, you can use the SpeedBox and the light function of your e-bike at the same time.
Please note:
When tuning is active, your e-bike display (from a speed of approx. 23 km/h onwards) will only show half of the real speed - i.e. if a speed of 20 km/h is displayed, you are actually riding at 40 km/h, etc. Other values such as riding time will also be halved.
Installation
The SpeedBox 1.2 is a module or a chip that has to be connected directly to the motor. Thanks to the colour-coded connectors, you can also install it yourself.
-First you have to switch off your e-bike and remove the battery.
-Then you have to remove all the necessary parts of the e-bike to gain access to the connectors on the motor.
-Disconnect the connectors on the cable from the motor to the speed sensor.
-Connect the SpeedBox to the disconnected connectors.
-The remaining connectors must be connected to the connector to the light.
-Reassemble the motor or the e-bike to its original condition.
-Switch on the e-bike and activate the tuning by pressing the light button.
-Your Bafang e-bike is now tuned and you can ride much faster with full motor support!
Of course, you can uninstall the SpeedBox at any time if you want to restore your e-bike to its original condition.
Note: If you install the SpeedBox 1.2 in a brand new Bafang e-bike, you must first ride the bike for at least 1 km before switching on the SpeedBox for the first time.
SpeedBox 1.2 for Bafang (3-pin connector) - Compatibility
This tuning tool is compatible with the following e-bike drives (with 3-pin connectors):
-Bafang Max Drive M300
-Bafang Max Drive M400
3 pins on the speed sensor connector. To check whether the number of pins is correct, remove the engine cover and look at the speed sensor connector.
-SpeedBox 1.2 and 1.3 (B.Tuning) modules for Bafang are compatible with both CAN and UART protocols.
Not compatible with the SpeedBox app.
Delivery time, Shipping costs, Minimum order value und Payment methods:
Delivery time
Delivery time is 1-8 business days within Germany. Postal delivery time outside Germany may take longer.
Shipping area
We ship to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.
For shipping to Germany please use our german shop.
For a solution to Switzerland and Liechtenstein please see here.
We do not ship to the USA, France, Canada (including all overseas territories) and generally outside the EU.
Shipping costs
The shipping costs for Germany are 3,50 Euro. The shipping costs are waived from an order value of 180 Euro. For countries within the EU the shipping costs are 9,90 Euro. The shipping costs are waived from an order value of 300 Euro. We ask you to cover the cost of any return shipment yourself. Please note that customs fees may apply in third countries outside the European Union.
Minimum order value
The minimum order value is 25 Euro. Only from this amount you can use prepayment or PayPal and bank transfer as payment methods.
Maximum order value
The maximum order value for orders outside the EU is 1.000 Euro. The maximum order value within the EU is 12.500 Euro.
Payment in advance bank transfer
Please transfer the total amount with your order number to our account which you received in the confirmation email. Please note that bank transfers within Germany can take up to three working days. Transfers from abroad, especially from Austria and Switzerland, usually arrive very quickly. From other countries, transfers can take a little longer on average.
Payment in advance Paypal
At the end of the order process you will be redirected to the page of Paypal. There you can initiate your payment. As soon as the Paypal transaction is completed, the status of your order will change in the store. The goods will then be shipped as soon as possible.
Comparison of e-bike tuning products
Type |
Software | (Module) Software (Controller) |
Box | Module | Module | Module | Module | (Kit) Module / Sensor |
(Kit) Module / Dongle |
Dongle |
Range of functions | ***** | ***** | * | ***** | **** | *** | *** | *** | *** / ** | * |
Easy installation of the tuning |
***** | ***** | **** | ** | ** | ** | ** | ** / * | ** / * | * |
Invisible after installation |
***** | ***** | * | ***** | ***** | ***** | ***** | ***** | ***** / **** | **** |
Switching on / off while riding |
* Gerät |
***** Gerät, Display |
* Box |
***** App, Display |
***** Display |
***** Display |
***** (App), Display |
*** Display, Magnet |
***** / **** Display / Dongle |
**** Dongle, (Licht) |
No more tuning Module at the bike |
***** | ***** | ***** | * | * | * | * | * | * / **** | **** |
Invisible dismantling |
***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** / *** | *** |
Easy dismantling |
***** | ***** | ***** | ** | ** | ** | ** | ** / * | ** / * | * |
Correct display of km/h |
***** Display |
***** Display |
* | ***** Display, App |
***** Display |
***** Display |
***** Display, App |
* | **** Display |
* |
Dethrottling |
***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** |
Reducing |
* | ***** | * | ***** | ***** | ***** | ***** | * | * | * |
Price range in euros |
169 to 209 |
189 to 299 | 149 to 154 | 219 to 239 |
159 to 179 | 139 to 259 |
139 to 309 |
89 to 199 |
89 to 209 |
139 to 159 |
Important: Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads. Legally permissible use is therefore only possible on private property or - if permitted - in competitions. Driving an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license as well as driving without insurance coverage. Tuning measures on the e-bike and e-scooter can lead to a loss of warranty rights and manufacturer warranties. In addition, tuning measures can lead to a loss of insurance coverage and accident victim assistance benefits in the event of accidents. The e-bike (or e-scooter) modified by tuning measures is exposed to an additional load due to the higher speed, which can lead to safety risks.