New
PRE ORDER
OUT STOCK

siMPLEk Pro for Impulse 2.0 / EVO / EVO-RS

TYPE: Impulse

VENDOR: sIMPLEk

159,00 €

maestro
master
paypal
sofort
visa
apple_pay
google_pay
PRODUCT INFORMATION
Payment & Shipment
Comparison
Customer reviews
Warnings
PRODUCT INFORMATION

sIMPLEk Pro for Impulse

This tuning module completely removes the speed limit of your Impulse e-bike drive so that you can finally enjoy the full motor power of your system. This tool has no further functions.

The installation of the tuning module at the motor is relatively simple (depending on the e-bike manufacturer) - in principle, you only have to pull a plug at the motor and connect the sIMPLEk module in between (see below). After installation, the sIMPLEk Pro tool is not visible from the outside.

In the standard configuration, the tuning is always deactivated when you switch on the e-bike. To activate the tuning, simply switch off the e-bike immediately after starting it, wait five seconds and switch it on again. A 10 km/h speedometer display signals that the tuning has been activated.

Made in Germany.

Important note: This sIMPLEk module for Impulse is the "Pro" version - this means that the tool is supplied as a finished product. You do not need to assemble it yourself.


Current speed remains readable

Unlike some other e-bike tuning tools, the actual speed of the sIMPLEk Pro remains readable on the speed display - but via the second digit and the first decimal place of the display. An example: a displayed speed of 14.1 km/h would correspond to a real speed of 41 km/h, etc.

Even values such as maximum speed and the kilometres travelled / total distance are displayed correctly - please note that these values are only adjusted after approx. 1 minute at standstill.


sIMPLEk Pro for Impulse - Compatibility

All e-bikes with the following Impulse drive systems: 2.0 / EVO / EVO-RS


Installation

The installation of the sIMPLEk Pro module is quite simple and can be done by yourself. Note, however, that the disassembly work required to access the speed sensor connector may vary depending on the e-bike manufacturer. If the motor is integrated into the frame at the head end, access to the cable harness can often be achieved without any disassembly work. If this is not the case, you must remove the motor to install the sIMPLEk Pro.

Always remove the e-bike battery before installing the sIMPLEk. The sIMPLEk Pro must be inserted between the speed sensor connections. You will find more detailed information in the operating instructions.

After the initial installation, a one-time calibration must be carried out so that the correct speed can be read in the speed display when the tuning mode is active.

Payment & Shipment

Delivery time, Shipping costs, Minimum order value und Payment methods:

Delivery time

Delivery time is 1-8 business days within Germany. Postal delivery time outside Germany may take longer.

Shipping area

We ship to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.

For shipping to Germany please use our german shop.

For a solution to Switzerland and Liechtenstein please see here.

We do not ship to the USA, France, Canada (including all overseas territories) and generally outside the EU.

Shipping costs

The shipping costs for Germany are 3,50 Euro. The shipping costs are waived from an order value of 180 Euro. For countries within the EU the shipping costs are 9,90 Euro. The shipping costs are waived from an order value of 300 Euro. We ask you to cover the cost of any return shipment yourself. Please note that customs fees may apply in third countries outside the European Union.

Minimum order value

The minimum order value is 25 Euro. Only from this amount you can use prepayment or PayPal and bank transfer as payment methods.

Maximum order value

The maximum order value for orders outside the EU is 1.000 Euro. The maximum order value within the EU is 12.500 Euro.

Payment in advance bank transfer

Please transfer the total amount with your order number to our account which you received in the confirmation email. Please note that bank transfers within Germany can take up to three working days. Transfers from abroad, especially from Austria and Switzerland, usually arrive very quickly. From other countries, transfers can take a little longer on average.

Payment in advance Paypal

At the end of the order process you will be redirected to the page of Paypal. There you can initiate your payment. As soon as the Paypal transaction is completed, the status of your order will change in the store. The goods will then be shipped as soon as possible.

Comparison

Comparison of e-bike tuning products

 

JUM-Ped

MTT

Badass Box

RedPed / BluePed /
GreenPed

VOLspeed

PearTune

SpeedBox

MBIQ

sIMPLEk

Sx2 Dongle

Type

Software (Module)
Software
(Controller)
Box Module Module Module Module (Kit)
Module /
Sensor
(Kit)
Module /
Dongle
Dongle
Range of functions ***** ***** * ***** **** *** *** *** *** / ** *

Easy installation of the tuning

***** ***** **** ** ** ** ** ** / * ** / * *

Invisible after installation

***** ***** * ***** ***** ***** ***** ***** ***** / **** ****

Switching on / off while riding

*
Gerät
*****
Gerät, Display
*
Box
*****
App, Display
*****
Display
*****
Display
*****
(App), Display
***
Display, Magnet
***** / ****
Display /
Dongle
****
Dongle, (Licht)

No more tuning Module at the bike

***** ***** ***** * * * * * * / **** ****

Invisible dismantling

***** ***** ***** ***** ***** ***** ***** ***** ***** / *** ***

Easy dismantling

***** ***** ***** ** ** ** ** ** / * ** / * *

Correct display of km/h

*****
Display
*****
Display
* *****
Display, App
*****
Display
*****
Display
*****
Display, App
* ****
Display
*

Dethrottling

***** ***** ***** ***** ***** ***** ***** ***** ***** *****

Reducing

* ***** * ***** ***** ***** ***** * * *

Price range in euros

169 to
209
189 to 299 149 to 154 219 to
239
159 to 179 139 to
259
139 to
309
89 to
199
89 to
209
139 to
159

Legend

Customer reviews
Warnings

Important: Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads. Legally permissible use is therefore only possible on private property or - if permitted - in competitions. Driving an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license as well as driving without insurance coverage. Tuning measures on the e-bike and e-scooter can lead to a loss of warranty rights and manufacturer warranties. In addition, tuning measures can lead to a loss of insurance coverage and accident victim assistance benefits in the event of accidents. The e-bike (or e-scooter) modified by tuning measures is exposed to an additional load due to the higher speed, which can lead to safety risks.

siMPLEk Pro for Impulse 2.0 / EVO / EVO-RS

siMPLEk Pro for Impulse 2.0 / EVO / EVO-RS

159,00 €
Pre-loader