MTC Set 2: MountainTuning Controller and Display for ePowerFun epf-1 PRO

Mountain Tuning Controller (MTC) SET 2 for ePowerfun e-scooter ePF-1 PRO

Tuning for your e-scooter! With this ingenious set, the top speed of your ePF-1 PRO e-scooter can be increased from 20 km/h to up to 31 km/h. This will make your riding experience much more powerful and exciting. This makes your riding experience much more powerful and exciting. You'll also get from A to B much faster!

But that's not all: with the Mountain Tuning Controller, you can even equip your ePF-1 PRO with a practical cruise control function that makes riding on long, uniform routes much more relaxed!

The other functions of your e-scooter are not affected in any way by the Tuning Set 2.

Note: If you use the Mountain Tuning Controller, you must use a different app for your e-scooter, namely the free UNI Scooter app (available for Apple and Android). This has only advantages for you:

You can set the maximum speed to an individual value, from 6 km/h up to a brisk 31 km/h (the actual achievable speed always depends on certain additional factors, e.g. the rider's weight). If you feel a bit insecure and want to approach 31 km/h slowly, you can increase the maximum speed moderately at first, e.g. to 24-25 km/h, etc.
Legally with a double click. Three different modes can be set via the UNI Scooter app: Factory set Eco with 12 km/h, Normal with 25 km/h and Sport with 31 km/h top speed. You can easily switch between the modes by double-clicking on the display. The app can be used to reduce the maximum speed in Sport mode as desired. In this case, the speeds in the other modes are also reduced accordingly - this means that if you set the Sport mode to (e.g.) 25 km/h, you will drive a maximum of 20 km/h in Normal mode and 9 km/h in Eco mode. This means that if you have set the Sport mode to 25 km/h, you can switch to Normal mode in a flash by double-clicking and then only drive -quite legally- at 20 km/h maximum speed.
The cruise control function can only be activated via the app.

Installation:

The Tuning Set 2 consists of a display with Bluetooth module (establishes the connection with the UNI Scooter App) and an 18A controller for 10 inch wheels.

For installation, the original controller of the ePF-1 PRO scooter must be removed and replaced with the Mountain Tuning Controller. This is not really difficult and can be done easily by yourself with a little technical skill. First you have to unscrew the base plate of the ePF-1 PRO scooter and remove the existing controller. Then you have to attach the Mountain Tuning Controller instead - simply fasten it with two screws and connect it to the respective plugs. Please refer to the illustration below!

If you have a 2021 ePF-1 PRO e-scooter, you must also replace the old display with the Mountain Tuning Display. This is necessary so that you can connect to the UNI Scooter app (this is not possible with the original 2021 series display). Only with the app can you use the cruise control and set the maximum speed individually.

If you still have an "old" ePF-1 e-scooter (before model year 2021), you do not need to replace the display.

Please note: By installing the Mountain Tuning Controller Set 2, the maximum speed of your ePF-1 PRO e-scooter can be manipulated. As a result, the operating licence of your e-scooter will expire in Germany. However, you can use the tuning tool in regions where higher maximum speeds are permitted, for example in some other countries (in Germany, the maximum speed for e-scooters is 20 km/h according to the Electric Mini Vehicle Ordinance). Please always observe the local legislation abroad.

Important: Note the picture with connections!

Here you can download the UNI Scooter app free of charge:

Android

Apple

YouTube