New
PRE ORDER
OUT STOCK

MBIQ-P Plug-in solution AEG, Panasonic & Flyer (2pin)

TYPE: Panasonic

VENDOR: MBIQ

149,90 €

PRODUCT INFORMATION
Payment & Shipment
Comparison
Customer reviews
Warnings
PRODUCT INFORMATION

MBIQ-P Plug-In Solution for AEG / Panasonic / Flyer (2pin)

The MBIQ-P is a microcontroller-based tuning tool that removes the 25 km/h speed limit of AEG / Panasonic / Flyer e-bike motors. There are no further functions. As it is a practical plug-in solution, installation is extremely simple: in principle, the MBIQ-P simply has to be plugged in between the speed sensor and the motor control unit.

The MBIQ-P is programmable by the customer so that the tuning can be switched on or off as required. An extra battery is not required, as the power supply is provided passively via the sensor path.

With this ingenious tuning tool, you can finally discover the full potential of your e-bike drive and ride much faster than 25 km/h with full motor support!


Functionality

After installation, the MBIQ-P analyses and processes the current speed profile and, if tuning is activated, passes on manipulated values. In doing so, speeds above 25 km/h are blocked for the motor firmware, which results in the 25 km/h speed limit being completely removed.

Important note: Due to this special mode of operation, the e-bike display will no longer show correct speed values from a speed of approx. 22 km/h onwards.

By the way, the evaluation of the motor software is not influenced by the manipulated values ("anti-tuning-ready").


Customer programmable

The MBIQ-P can be programmed, which allows the tuning to be switched on and off.

Programming is done by means of certain wheel movements when the e-bike is started up (PC or smartphone are not required). In this way, three different operating modes can be set:

-Mode 1: Tuning mode / tuning permanently activated (25 km/h speed limit is lifted, no correct speed display from approx. 22 km/h onwards).

-Mode 2: Normal operation / tuning permanently deactivated (engine support completely normal up to 25 km/h, correct speed display).

-Mode 3: Tuning selectable at start. In this mode, when the e-bike is switched on, you can use the magnet to determine whether the tuning should be active or not. To switch on the tuning, the magnet must be in front of the sensor for at least 4-5 seconds when starting up, otherwise the tuning remains inactive.

When correctly executed, the respective operating mode is indicated by the brief display of certain speed values on the display.


MBIQ-P for AEG / Panasonic / Flyer (2-pole) - Data at a glance

-Speed limitation is completely removed.

-The max. supported speed can be set in several steps to a desired value (from version v_I_1).

-Programmable by the customer (without additional devices).

-Tuning can thus be switched on and off.

-Mode of operation: Speed manipulation (no halving).

-Connection type: Plug-in solution, the tool is plugged in between the sensor and the motor.

-The MBIQ-P is very small and requires little installation space.

-Display: When tuning is active, manipulated values from approx. 22 km/h onwards.

-The tool is completely maintenance-free.

-No separate power supply/battery required.

-"Anti-Tuning Ready".

-Weight: only approx. 5g.

-Connection length: approx. 15 cm.

-Made in Germany.


MBIQ-P Plug-In Solution for AEG / Panasonic / Flyer (2pin) Compatibility

This tuning tool is compatible with E-Bikes with Panasonic / Flyer mid-mounted motors with compatible 2 pin connector system, e.g.:

-Panasonic (e.g. GX... / Ultimate)

-AEG / Bafang

Others with compatible plug connector.

For AEG / Bafang please check the sensor + connector for compatibility in advance!

The MBIQ-P is compatible with the common motor firmware of the respective manufacturers.

Note: On some AEG models (e.g. Graveller 7xxx) the sensor/motor connector is reversed. Please check this beforehand and contact us if in doubt.

Payment & Shipment

Delivery time, Shipping costs, Minimum order value und Payment methods:

Delivery time

Delivery time is 1-8 business days within Germany. Postal delivery time outside Germany may take longer.

Shipping area

We ship to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.

For shipping to Germany please use our german shop.

For a solution to Switzerland and Liechtenstein please see here.

We do not ship to the USA, France, Canada (including all overseas territories) and generally outside the EU.

Shipping costs

The shipping costs for Germany are 3,50 Euro. The shipping costs are waived from an order value of 180 Euro. For countries within the EU the shipping costs are 9,90 Euro. The shipping costs are waived from an order value of 300 Euro. We ask you to cover the cost of any return shipment yourself. Please note that customs fees may apply in third countries outside the European Union.

Minimum order value

The minimum order value is 25 Euro. Only from this amount you can use prepayment or PayPal and bank transfer as payment methods.

Maximum order value

The maximum order value for orders outside the EU is 1.000 Euro. The maximum order value within the EU is 12.500 Euro.

Payment in advance bank transfer

Please transfer the total amount with your order number to our account which you received in the confirmation email. Please note that bank transfers within Germany can take up to three working days. Transfers from abroad, especially from Austria and Switzerland, usually arrive very quickly. From other countries, transfers can take a little longer on average.

Payment in advance Paypal

At the end of the order process you will be redirected to the page of Paypal. There you can initiate your payment. As soon as the Paypal transaction is completed, the status of your order will change in the store. The goods will then be shipped as soon as possible.

Comparison

Comparison of e-bike tuning products

 

JUM-Ped

MTT

Badass Box

RedPed / BluePed /
GreenPed

VOLspeed

PearTune

SpeedBox

MBIQ

sIMPLEk

Sx2 Dongle

Type

Software (Module)
Software
(Controller)
Box Module Module Module Module (Kit)
Module /
Sensor
(Kit)
Module /
Dongle
Dongle
Range of functions ***** ***** * ***** **** *** *** *** *** / ** *

Easy installation of the tuning

***** ***** **** ** ** ** ** ** / * ** / * *

Invisible after installation

***** ***** * ***** ***** ***** ***** ***** ***** / **** ****

Switching on / off while riding

*
Gerät
*****
Gerät, Display
*
Box
*****
App, Display
*****
Display
*****
Display
*****
(App), Display
***
Display, Magnet
***** / ****
Display /
Dongle
****
Dongle, (Licht)

No more tuning Module at the bike

***** ***** ***** * * * * * * / **** ****

Invisible dismantling

***** ***** ***** ***** ***** ***** ***** ***** ***** / *** ***

Easy dismantling

***** ***** ***** ** ** ** ** ** / * ** / * *

Correct display of km/h

*****
Display
*****
Display
* *****
Display, App
*****
Display
*****
Display
*****
Display, App
* ****
Display
*

Dethrottling

***** ***** ***** ***** ***** ***** ***** ***** ***** *****

Reducing

* ***** * ***** ***** ***** ***** * * *

Price range in euros

169 to
209
189 to 299 149 to 154 219 to
239
159 to 179 139 to
259
139 to
309
89 to
199
89 to
209
139 to
159

Legend

Customer reviews
Warnings

Important: Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads. Legally permissible use is therefore only possible on private property or - if permitted - in competitions. Driving an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license as well as driving without insurance coverage. Tuning measures on the e-bike and e-scooter can lead to a loss of warranty rights and manufacturer warranties. In addition, tuning measures can lead to a loss of insurance coverage and accident victim assistance benefits in the event of accidents. The e-bike (or e-scooter) modified by tuning measures is exposed to an additional load due to the higher speed, which can lead to safety risks.

MBIQ-P Plug-in solution AEG, Panasonic & Flyer (2pin)

MBIQ-P Plug-in solution AEG, Panasonic & Flyer (2pin)

149,90 €
Pre-loader