SpeedBox 3.0 B.Tuning for Flyon

SpeedBox 3.0 B.Tuning for Flyon

This is a tuning module that can be connected to the practical Speedbox app. The tool is optimised for performance and maximum riding fun. The core function of the SpeedBox is of course the removal of the 25 km/h speed limit of Haibike Flyon TQ motors. With this tuning tool, however, the maximum speed can even be set to an individually desired value. Even when tuning is active, the e-bike display always shows the correct data. Using the app, you can not only monitor and record your riding data on the go, you also benefit from various additional functions. The tuning module can be switched on and off at any time - either via the app or using the control buttons on the display. If you want to optimise your Flyon e-bike and make it faster, the SpeedBox 3.0 is a very good choice. If required, the tuning chip can be updated via Bluetooth connection.

Speedbox 3.0 B.Tuning for Flyon - Features at a glance

-Removal of the 25 km/h speed limit.

-Tuning can be switched on and off: The tuning can be switched on and off via the SpeedBox app, or by using the → ← → ← button sequence in order to switch between two assistance modes twice. After that, the display will briefly show the actual speed limit. If you deactivate the tuning again, the display briefly shows 25 RPM: This signals that the tuning has been switched off and the maximum speed ends at 25 km/h again. The e-bike then functions again as it did before the tuning chip was installed.

-Maximum speed freely adjustable: With the SpeedBox 3.0, the maximum speed can be set individually, even without a smartphone or PC. Simply change the mode: Extreme - High - Mid - Low - Mid - High - Extreme - and the display shows the current speed limit. Now you can set the maximum speed by briefly pressing the light button or turning the rear wheel 180°. A displayed cadence of 15 RPM corresponds to a speed limit of 15 km/h, 25 RPM corresponds to a speed limit of 25 km/h, 40 RPM corresponds to 40 km/h and so on. After five seconds of inactivity, the last displayed value is automatically saved.

-Correct data in the display: After installing the SpeedBox 3.0, the display continues to show the correct data, even with active tuning (e.g. maximum and average speed, range and daily distance).

-Installation: The SpeedBox 3.0 B.Tuning is a tuning chip or module that must be connected to the engine. The connection is made by means of original plugs and does not require any special technical knowledge. Of course, the module can also be removed again if necessary.

-The manufacturer uses only high-quality components to produce the SpeedBox 3.0. The processor of the module has even been certified for the automotive industry.

SpeedBox App

The SpeedBox App was specially developed for SpeedBox 3.0 B.Tuning modules. The module is connected to the smartphone via Bluetooth.

When you start the SpeedBox app for the first time, you will be asked to enter a personal PIN for security reasons. This PIN must be entered each time you start the app. You also have to set a one-time service password. You can use this if you have forgotten your PIN or want to change it.

After the tuning module has been paired with the smartphone, you can display numerous relevant data and useful driving parameters on the smartphone display. You can also save individual tours, share them with friends and monitor your own performance.

Here you can see the functions of the SpeedBox app at a glance:

-Control of the tuning module.

-Setting the speed limit.

-Display of various riding parameters.

-Save and retrieve driving data.

-"Hide tuning" feature.

-Engine diagnostics.

-Engine lock.

Please note: The SpeedBox App is not mandatory for using the SpeedBox 3.0 B.Tuning module, but it considerably expands the module's range of functions.

SpeedBox App

Tip: Before ordering the SpeedBox 3.0 B.Tuning Chip, you should download the SpeedBox app first. Use the demo version to familiarise yourself with the functions of the app. You can also check whether the app is running correctly on your smartphone.

Speedbox 3.0 B.Tuning for Flyon - Compatibility

-Compatible with e-bikes with Haibike Flyon TQ HPR120S motors.

-Compatible with Flyon displays.

-Compatible with SpeedBox app (available for Apple and Android).

-Smartphone requirement: Bluetooth 4.0 or higher.

In case of updating the software of your e-bike, uninstall the SpeedBox from the e-bike first, update the software and reinstall the SpeedBox.