PearTune MSO 3.0 "Still On" for Haibike Flyon

PearTune MSO 3.0 "Still On" for Haibike FLYON / TQ

A high-quality tuning tool especially for e-bikes with Haibike FLYON drive systems. The FLYON motors were developed by Haibike in cooperation with the technology supplier TQ. The drives are considered extremely powerful and were designed for use in e-mountain bikes. The enormous power was previously only limited by the 25 km/h speed limit.

With the PearTune MSO for FLYON you can change that and finally use the full potential of the motor. It is a microcontroller-based tuning module that completely removes the 25 km/h speed limit - the speed is not simply doubled from 25 to 50 km/h, as is the case with some other tuning tools. "MSO" therefore means nothing other than "Max Speed Off". If you would like to determine yourself how fast you ride your FLYON motor-assisted in the future, this tuning tool is an optimal solution!

Further advantages of the PearTune MSO for FLYON:

Correct speed display

Even with active tuning, the e-bike display shows the correct speed (no halved values, as with some other tuning tools). Maximum and average speed are also displayed correctly. Only in the case of distance can the values read out be a little lower than in reality.

Easy installation

The PearTune MSO is a tuning module that must be permanently installed on the engine. Thanks to the "Plug & Play" principle and the use of original connectors, installation is extremely simple. The PearTune module is simply connected between the magnetic speed sensor and the engine and between the display and the engine.

After installation, the module configures itself and adjusts to the respective e-bike - this runs fully automatically, a PC or smartphone is NOT required.

The PearTune MSO does not need its own battery, as power is supplied via the display connection.

Due to the use of original connectors, the tuning module can be easily removed if necessary. Afterwards, the e-bike is back in its original condition and it is no longer recognisable that the bike has ever been tuned.

This PearTune MSO for FLYON is the so-called "STILL ON" version - in this case, the tuning is always active as soon as you switch on the bike. This means, you do not need any buttons to switch on the tuning module. The "Still On" version is intended for FLYON e-bikes on which the light function has not been activated.

25 km/h speed limit is completely cancelled

When the tuning is switched on, there is no longer a speed limit - so theoretically you can ride at unlimited speed with full motor support. The actual maximum speed that can be reached basically depends only on your cadence. According to the manufacturer, with active tuning, speeds of up to 60 km/h can be reached with the PearTune.

There are no undesirable side effects when tuning is active (no flickering display, etc.).

Compact and waterproof

The PearTune module is very compact and therefore easy to install. Of course, the tool is absolutely waterproof.

PearTune MSO 3.0 for FLYON e-bikes - Compatibility

- E-bikes with Haibike FLYON / TQ mid-mounted motors.

-Haibike uses corresponding FLYON drives on various XDURO model variants, e.g. NDURO, ALLMTN, ALLTRAIL and ADVENTR e-bikes.

-The tuning module has also been successfully tested on current FLYON 2020 drives.

PearTune MSO for FLYON e-bikes - Technical data

- Module dimensions: 12 x 25 x 4 mm

- Supply voltage range: 5 - 15 V

- Maximum current consumption: 100 mA

- Maximum power consumption: 1.5W

- Weight: approx. 20g

This tuning tool is manufactured in the Czech Republic. PearControl, the manufacturer of the PearTune modules, is a proven company that has been producing highly effective tuning solutions for e-bikes from brands such as Bosch, Brose, Shimano, Yamaha and Giant for years.