New
PRE ORDER
OUT STOCK

MTT HubControl: Chip for Mahle X35 and X35+

TYPE: Mahle

VENDOR: MountainTuning

139,00 €

maestro
master
paypal
sofort
visa
apple_pay
google_pay
PRODUCT INFORMATION
Payment & Shipment
Comparison
Customer reviews
Warnings
PRODUCT INFORMATION

MTT HubControl Chip for Mahle X35 and X35+

The MTT HubControl chip is suitable for all hub motors with a 9-pin connection (see connector) that have a speed sensor installed in the motor, such as the Mahle X35 or X35+. The module is integrated into the supply line of the hub motor using the same connectors. The chip is 13cm long. If the module is installed, the displayed speed - as already known from other MTT modules - will freeze at a value <25 km/h. The 25 km/h speed limit is completely removed.

Tip: We recommend the use of GPS-enabled additional devices such as your smartphone if you want to display the correct speed while on the move. Suitable mounts for the handlebars are available from retailers.

How it works

After installation, the MTT (with active tuning) will analyse and process the current speed profile and pass on manipulated values. This outwits and cancels the preset 25 km/h speed limit so that you can ride much faster with full motor support.

Please note: As the MTT HubControl blocks speeds above 25 km/h for the motor firmware when tuning is active, the displayed speed always remains <25 km/h. This means that the real speed is only displayed up to 25 km/h. Therefore, the total kilometre display of the system will also no longer correspond to the real distance travelled.

Important: The maximum achievable speed is difficult to predict. First of all, this is due to the fact that it is a hub motor and with 40 Nm it quickly reaches its limits. Theoretically, speeds of up to 40 km/h are possible, but in reality speeds of up to 30 km/h are within the tolerance range. If the tuning does not allow higher speeds, this is not due to the tuning itself, but to the motor, battery and their firmware.

Installation

For installation, the MTT Hub Control must be installed in the engine compartment.

To gain access to the plug connections, the plastic cover of the engine (and sometimes also a crank) must be removed briefly.

MTT Hub Control for Mahle X35 and X35+ - Compatibility

This tuning module is compatible with e-bikes with the “Mahle X35” and “Mahle X35+” drive systems.

Important:

-Not compatible with Mahle X25.

Attention: Please do not carry out any updates after installing and using a tuning! Afterwards, compatibility may no longer be guaranteed!

Scope of delivery

-1 MTT Hub Control

-4 cable ties

-instructions

This tuning tool is Made in Germany.

Payment & Shipment

Delivery time, Shipping costs, Minimum order value und Payment methods:

Delivery time

Delivery time is 1-8 business days within Germany. Postal delivery time outside Germany may take longer.

Shipping area

We ship to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.

For shipping to Germany please use our german shop.

For a solution to Switzerland and Liechtenstein please see here.

We do not ship to the USA, France, Canada (including all overseas territories) and generally outside the EU.

Shipping costs

The shipping costs for Germany are 3,50 Euro. The shipping costs are waived from an order value of 180 Euro. For countries within the EU the shipping costs are 9,90 Euro. The shipping costs are waived from an order value of 300 Euro. We ask you to cover the cost of any return shipment yourself. Please note that customs fees may apply in third countries outside the European Union.

Minimum order value

The minimum order value is 25 Euro. Only from this amount you can use prepayment or PayPal and bank transfer as payment methods.

Maximum order value

The maximum order value for orders outside the EU is 1.000 Euro. The maximum order value within the EU is 12.500 Euro.

Payment in advance bank transfer

Please transfer the total amount with your order number to our account which you received in the confirmation email. Please note that bank transfers within Germany can take up to three working days. Transfers from abroad, especially from Austria and Switzerland, usually arrive very quickly. From other countries, transfers can take a little longer on average.

Payment in advance Paypal

At the end of the order process you will be redirected to the page of Paypal. There you can initiate your payment. As soon as the Paypal transaction is completed, the status of your order will change in the store. The goods will then be shipped as soon as possible.

Comparison

Comparison of e-bike tuning products

 

JUM-Ped

MTT

Badass Box

RedPed / BluePed /
GreenPed

VOLspeed

PearTune

SpeedBox

MBIQ

sIMPLEk

Sx2 Dongle

Type

Software (Module)
Software
(Controller)
Box Module Module Module Module (Kit)
Module /
Sensor
(Kit)
Module /
Dongle
Dongle
Range of functions ***** ***** * ***** **** *** *** *** *** / ** *

Easy installation of the tuning

***** ***** **** ** ** ** ** ** / * ** / * *

Invisible after installation

***** ***** * ***** ***** ***** ***** ***** ***** / **** ****

Switching on / off while riding

*
Gerät
*****
Gerät, Display
*
Box
*****
App, Display
*****
Display
*****
Display
*****
(App), Display
***
Display, Magnet
***** / ****
Display /
Dongle
****
Dongle, (Licht)

No more tuning Module at the bike

***** ***** ***** * * * * * * / **** ****

Invisible dismantling

***** ***** ***** ***** ***** ***** ***** ***** ***** / *** ***

Easy dismantling

***** ***** ***** ** ** ** ** ** / * ** / * *

Correct display of km/h

*****
Display
*****
Display
* *****
Display, App
*****
Display
*****
Display
*****
Display, App
* ****
Display
*

Dethrottling

***** ***** ***** ***** ***** ***** ***** ***** ***** *****

Reducing

* ***** * ***** ***** ***** ***** * * *

Price range in euros

169 to
209
189 to 299 149 to 154 219 to
239
159 to 179 139 to
259
139 to
309
89 to
199
89 to
209
139 to
159

Legend

Customer reviews
Warnings

Important: Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads. Legally permissible use is therefore only possible on private property or - if permitted - in competitions. Driving an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license as well as driving without insurance coverage. Tuning measures on the e-bike and e-scooter can lead to a loss of warranty rights and manufacturer warranties. In addition, tuning measures can lead to a loss of insurance coverage and accident victim assistance benefits in the event of accidents. The e-bike (or e-scooter) modified by tuning measures is exposed to an additional load due to the higher speed, which can lead to safety risks.

MTT HubControl: Chip for Mahle X35 and X35+

MTT HubControl: Chip for Mahle X35 and X35+

139,00 €
Pre-loader