BluePed for Yamaha Powerdrive

BluePed: Tuning module for e-bikes with Yamaha PW mid-mounted motors

BluePed is an innovative tuning module exclusively for e-bikes with Yamaha Powerdrive motors (manufacturers: Haibike, Bulls...). The BluePed removes the 25 km/h speed limit so that you can ride much faster with full motor support. Even when tuning is activated, the LCD or LED display continues to show the correct speed values. You have the option of conveniently controlling the module via a practical smartphone app (Android & iPhone) - e.g. you can set the level of maximum motor support to an individual value as you wish. Thanks to the (free) BluePed app, this Yamaha tuning tool gives you significantly more setting options than most comparable tuning devices.

Another very practical feature is that you can display an unusually large number of parameters on your smartphone while riding via the BluePed app, which far exceed the scope of the Yamaha display (see below). Tip: To ensure that you always have a good view of your smartphone display while riding, the BluePed module can be supplemented with the practical FINN universal smartphone holder for the handlebars.

The BluePed module can be switched on at any time via the light switch of your Yamaha e-bike (alternatively: "Mode: HIGH"). The original function of the light switch remains unchanged.

Operating instructions

Important note: In principle, you only need the BluePed app to define the settings of the module. These settings will be saved automatically, so that you can use the BluePed Tuning Tool completely without your smartphone. So you don't need to take your smartphone with you every time you want to go for a ride on your e-bike. Of course, you can adjust the settings of the BluePed module at any time or cancel the tuning completely.

The installation of the BluePed module is quite simple and straightforward. Note: Since no cables have to be damaged during installation, you can restore your e-bike to its original condition at any time.

With which e-bikes is the BluePed module compatible?

- E-bikes with Yamaha PW motors from 2015, e.g. Bulls or Haibike.
- The decisive factor is that your e-bike must have the Yamaha LCD display or LED display shown here (in the 2016 version, the control element also has a micro USB output).

- Smartphone Android from 4.4 or iOS from 9.2
- For pedelecs with 25 km/h limit, not suitable for s-pedelecs.

What data does the BluePed app display?

The big advantage of the BluePed Tuning Tool is that your Yamaha display shows all values (e.g. current speed etc.) correctly. However, we would still like to recommend the BluePed app to you, as it shows much more data than the Yamaha display - see for yourself:

- Current speed
- Maximum speed
- Average speed
- Current distance travelled
- Total distance covered
- Travel time
- Range (remaining kilometres with motor support)
- Battery status
- Conversion from km/h to mph only in the app
- Current battery charge level in percent divided by Ø per KM (B-Reichw.)
- RPM (current cadence)
- Average RPM (ØRPM)
- Maximum RPM (MRPM)
- Support level (STD)
- Current power (PWR)
- Average power (ØPWR)
- Percentage of battery per KM travelled (% per KM)
- Average value from the last 5 KM (Ø % per KM)

Of course, you can reset the values to 0 at any time.

Tip: If you want to uninstall the BluePed Tuning Tool at some point, you can calculate the actual total kilometres with the function "Balance total kilometres".

Important: If you have an e:i Shock system on your e-bike, activation via the light button will not work.

The BluePed module was designed to make installation in the Yamaha motor as uncomplicated as possible. The communication between the smartphone app and the BluePed module works wirelessly via Bluetooth 4.0.

Scope of delivery

- BluePed Tuning Module
- Installation instructions for installing the module in the engine via PDF / Operating instructions for the BluePed Smartphone App via PDF: BluePed_Instruction.pdf (1.3 MB)

Recommended accessories (optional)

- Stylish FINN smartphone universal holder for your steering wheel.
- Charging cable (Micro USB to Micro USB or Micro USB to Lightning). With the charging cable you can charge your smartphone while riding your e-bike (does not work with all smartphones).
- The Sminno Cesa Cruise universal hands-free kit for e-bikes.

Smartphone App

Redped - E-Bike Tuning App (EBT2 App) Download:

Available for Android or iOS.

iPhone: Requires iOS 11.0 or newer

Attention: This tuning tool is NOT compatible with e-bikes of the Yamaha brand, e.g.:

Yamaha Moro 07

Yamaha CrossCore RC

Yamaha Wabash RT

Yamaha Booster / Booster Easy