PearTune MSO 3.0 Normal for Panasonic FIT 1.0

PearTune 3.0 NORMAL for Panasonic FIT 1.0

Say goodbye to your e-bike's 25 km/h speed limit!

With the PearTune MSO 3.0 tuning chip, you can unlock your e-bike with Panasonic motor and FIT 1.0 system allowing you to ride much faster with full motor support.

In short, the 25 km/h will be completely removed; this tuning tool has no other functions.

The PearTune 3.0 is a module or chip that must be connected in the engine compartment using the watertight connectors. Please note: Approx. 7 cm of cable must be removed during installation. Instead, the display connectors from the PearTune are installed there (6 pin & 8 pin).

The chip does not require its own battery.

Correct speed remains readable up to 45 km/h

Up to a speed of 22.3 km/h, the display shows the correct speed.

From 22.4 km/h to 45 km/h, the correct speed can be read via the second digit and the decimal place of the display (a 23.5 km/h display would therefore correspond to 35 km/h, 24.5 km/h would be 45 km/h in reality, etc.).

At speeds higher than 45 km/h, the display is "frozen" at 24.5 km/h.

The other data, such as distance travelled and mileage, are displayed correctly.

Tuning can be switched on and off

This is the PearTune 3.0 in the "Normal" version: After installing the tuning chip, you can decide for yourself whether the tuning should be active or not. When stationary or while riding, the tuning can be activated at any time by pressing the light button twice. When stationary, tuning can also be activated by pressing the +-+- button combination.

For confirmation, the display briefly shows the values 9.9 or 9.0 / 2.0 or 2.5 after activating / deactivating the tuning.

P.S.: If the required operating buttons are not available on your e-scooter, you can also purchase this tuning chip in a "StillOn" version - in this case the tuning is always active as soon as you switch on the e-bike.

Compatibility

Compatible with e-bikes with PANASONIC mid-mounted motors (GX0 & GX Ultimate, PowerPlus) in combination with FIT 1.0 displays (D0 T5 etc.).

FIT 1.0 displays can be recognised by designations such as "D0" or "FIT 1.0".

This applies to e-bikes from FLYER or HERCULES, for example, if they are equipped with a Panasonic motor and FIT 1.0 system.

Example: FLYER Upstreet5 7.3 with Panasonic 36V GX Power with D0 display = FIT 1.0

Note: If you have a model with the new FIT 2.0 system, please select the PearTune 3.0 normal version for Panasonic FIT 2.0.

Note: If you have a BULLS e-bike with Panasonic drive and FIT system, this is always the Fit 2.0 version! E-bikes from FLYER, on the other hand, are available with both FIT 1.0 and FIT 2.0 systems.

If you are unsure which FIT version your e-bike is equipped with, please contact our support team before ordering! We will be happy to help you.

Our special tip: This tuning chip is also available in a special PearTune 4.0 version, where you benefit from various attractive additional features - e.g. you can individually set the level of engine support you want, define a personal activation code or activate a chip lock that allows you to make the tuning temporarily "invisible" to others.