PearTune 4.0 for Panasonic FIT 2.0

PearTune 4.0 for Panasonic FIT 2.0

This is a tuning chip especially for Panasonic e-bikes with integrated FIT system. The removal of the 25 km/h speed limit is the core function, but the chip has many more optimisation options to offer. For example, the level of the maximum supported speed can be set to an individual value; and a personal activation code can be set for activation/deactivation. Furthermore, you benefit from a correct km/h display, even when tuning is active. The chip is controlled entirely via the control buttons on the e-bike; neither a PC nor a smartphone are required.

Since PearTune 4.0 is a module or chip that is installed in the engine compartment with waterproof connectors, no additional battery is required.

PearTune 4.0 for Panasonic FIT 2.0 - Features at a glance:

-Removal of the 25 km/h speed limit.

-Correct values in the display, even with active tuning (current speed).

-Set maximum speed: The maximum supported speed can be set to an individual value by pressing the + and - buttons. After 10 seconds of inactivity, the last selected maximum speed is automatically saved.

-Chip activation: By default, tuning can be switched on and off at any time by pressing the light button twice. After activation/deactivation, the display will briefly show the values 9.9 or 9.0 / 2.0 or 2.5 for confirmation.

-Setting an individual code for chip activation: Selection of the buttons with which you want to activate/deactivate the tuning.

-Chip lock: When the chip lock is activated, the tuning can no longer be activated with any button. This makes the tuning virtually "invisible" and prevents access by unauthorised persons.

-Chip status when switching on the bike: With this function you can define whether the tuning chip should automatically be ON or OFF when the e-bike is switched on.

-Addition of the correct number of kilometres ridden: When riding with the tuning chip activated, the distance travelled no longer corresponds to the distance actually travelled. However, it is possible to add the correct number of kilometres, whereby the method of calculation can be determined by the user, e.g. by adding the number of kilometres while riding and while stationary or only when stopping, etc.

-Chip reset: If you want to install the tuning chip in another e-bike or replace the speed sensor, you should perform a chip reset. The chip settings can be retained or the chip can be reset to the factory settings.

-Chip software version information: The current software version of the chip can be shown on the display.

PearTune 4.0 for Panasonic FIT 2.0 - Compatibility

This tuning chip is compatible with the following e-bike drives ( mid-mounted motors):

-Panasonic GX0, GX Ultimate & PowerPlus with integrated FIT 2.0 system.

-Compatible with all displays

-Important: This product is ONLY compatible with the new 2022/2023 bikes (for example from Flyer or Bulls) that have the new FIT system integrated (FIT 2.0) - the bikes must have the info "FIT E-Bike System Integration" displayed on the screen when you switch ON the display!

See this picture:

If this information is NOT displayed on your e-bike, you must order the "normal" PearTune 4.0 for Panasonic e-bikes (without the FIT system). Please note: If you have an old Flyer e-bike WITH the FIT 1.0 system (i.e. one that was manufactured before 2022), you must select the PearTune MSO 4.0 for Panasonic FIT 1.0. You can recognise FIT 1.0 displays by the designations "D0" or "FIT 1.0".

-Even compatible with latest software (from 2023, but also 2024 etc.).

-Attention: In rare cases, e-bikes from 2022 onwards are also equipped with the "old" FIT 1.0 system. In this case, select the PearTune 4.0 for Panasonic FIT 1.0 (see above).

-Note: If you have a BULLS e-bike with Panasonic drive and FIT system, it is always the Fit 2.0 version! E-bikes from FLYER, on the other hand, are available with both FIT 1.0 and FIT 2.0 systems.

If you are unsure which FIT version your e-bike is equipped with, please contact our support team before ordering! We will be happy to help you.