PearTune 4.0 for Panasonic FIT 1.0

PearTune 4.0 for Panasonic FIT 1.0

With this tuning chip, you can completely remove the 25 km/h speed limit of your e-bike so that you can ride much faster with full motor support (also compatible with FLYER e-bikes with Panasonic FIT 1.0 drives). The true potential of the motor can finally be fully utilised.

As this is the "4.0" version of this tuning tool, you also benefit from various additional options - e.g. the level of maximum motor support can be set individually, the chip can be locked for outsiders or an individual activation code can be set.

The chip must be connected in the engine compartment using the waterproof connectors. Please note: Approx. 7 cm of cable must be removed during installation. Instead, the display connectors from the PearTune are installed there (6 pin & 8 pin).

Values on the display

Distance travelled and mileage are displayed correctly.

The current speed is displayed in real terms up to 22.3 km/h.

From 22.4 km/h to 45 km/h, the correct speed can be read off via the second digit and the decimal place (a 22.9 km/h display would therefore correspond to 29 km/h, 24.5 km/h would be 45 km/h, etc.).

At speeds higher than 45 km/h, the display remains at 24.5 km/h.

Tuning can be switched on and off

After installing the chip, you can decide for yourself whether the tuning should be active or not. When stationary or while riding, tuning can be activated at any time by pressing the light button twice. When stationary, tuning can also be activated by pressing the +-+- button combination.

For confirmation, the display briefly shows the values 9.9 or 9.0 / 2.0 or 2.5 after activating / deactivating the tuning.

Advantages of the 4.0 version

In addition to the features mentioned above, this 4.0 version of the PearTune tuning chip also has various additional features:

-Adjust the maximum speed yourself: The maximum supported speed can be set to an individual value by pressing the + and - buttons. After 10 seconds of inactivity, the last selected maximum speed is automatically saved.

-Chip lock: When the chip lock is switched on, the tuning chip can no longer be activated with any button. This makes the tuning virtually "invisible" and prevents access by unauthorised persons.

-Set individual activation/deactivation code.

-Tuning status when switching on the bike: With this function, you can specify whether the tuning chip should be automatically ON or OFF when the E-Bike is switched on.

-Chip reset: If you want to install the tuning chip in another E-Bike or replace the speed sensor, a chip reset should be carried out. The chip settings can be retained; alternatively, the chip can also be reset to the factory settings.

-The chip does not require its own battery.

Compatibility

Compatible with e-bikes with PANASONIC mid-mounted motors (GX0 & GX Ultimate, PowerPlus) and FIT 1.0 displays (D0 T5 etc.).

FIT 1.0 displays can be recognised by designations such as "D0" or "FIT 1.0".

Also compatible with FLYER / HERCULES e-bikes if they are equipped with a Panasonic motor and FIT 1.0 system.

Example: FLYER Upstreet5 7.3 with Panasonic 36V GX Power with D0 display = FIT 1.0

Note: If you have a model with the new FIT 2.0 system, please select the PearTune 4.0 for Panasonic FIT 2.0.

Note: If you have a BULLS e-bike with Panasonic drive and FIT system, this is always the Fit 2.0 version! E-bikes from FLYER, on the other hand, are available with both FIT 1.0 and FIT 2.0 systems.

If you are unsure which FIT version your e-bike is equipped with, please contact our support team before ordering! We will be happy to help you.