New
PRE ORDER
OUT STOCK

MBIQ-S Tuning Sensor for Bosch E-Bikes

TYPE: Bosch Gen2, Bosch Gen3, Bosch Gen4

VENDOR: MBIQ

134,90 €

PRODUCT INFORMATION
Payment & Shipment
Comparison
Customer reviews
Warnings
PRODUCT INFORMATION

MBIQ-S Tuning Sensor for Bosch E-Bikes

Here we have a simple but efficient tuning tool for e-bikes with Bosch mid-mounted motors. The MBIQ-S is a microcontroller-based sensor solution that completely removes the speed limit of Bosch drives. There are no other functions. A big advantage is the easy installation, as you just have to replace the original sensor with the MBIQ-S.

The MBIQ-S tuning tool does not require a separate battery.


How it works

After connecting the MBIQ-S, the tool will analyse the current speed profile and, if tuning is active, output manipulated values to the engine firmware. In doing so, speeds above 25 km/h are blocked for the motor firmware, so that the 25 km/h speed limit of Bosch e-bike motors is completely removed. Please note: As a result of this functional principle, the speedometer will no longer display the correct speed (with active tuning, the displayed speed always remains ≤ 25 km/h).

Note: The evaluation of the motor software is not affected by the manipulated values.


Three operating modes:

With the MBIQ-S tuning tool, it is possible to programme three different operating modes via specific, sequential wheel movements:

Tuning permanently activated (no limitation of motor support, from approx. 25 km/h the displayed speed no longer corresponds to the real speed).

Tuning permanently deactivated (motor support up to 25 km/h, real speed is displayed).

Tuning activation after switch-on condition: To activate tuning, the magnet must be in front of the sensor for approx. 3-4 seconds during start-up, otherwise tuning is deactivated.

Here you can find operating instructions (in German).


Easy installation

For installation you only have to replace the original sensor on the rear frame with the MBIQ-S. As the tool has been equipped with original connectors, an optimal connection is ensured.

Please note: Since the connector end is plugged into the engine compartment, the left crank arm must be removed in most cases. Special tools are required for this. It may also be necessary to remove the plastic cover of the engine.

Thanks to the neutral look, the appearance of your e-bike is not changed by the installation of the tuning tool.

Tip: We recommend that you keep the original sensor in case you want to restore your Bosch e-bike to its original condition at some point.


Robust & resistant to moisture

As the electronics of the MBIQ-S have been cast in the sensor, the tool is resistant to water and dirt.


MBIQ-S Tuning Sensor - Compatibility

Compatible with the following Bosch drive systems: Active Line, Active Line Plus, Performance Line, Performance Line CX, also Bosch Gen4 (model year 2020/2021). Compatible with all current motor firmwares.

Not compatible with Bosch Smart System 2022 (BES3)!


Scope of delivery

-MBTK-S Tuning-Kit sensor cable with original connectors (cable length approx. 60 cm)

-Instructions

Payment & Shipment

Delivery time, Shipping costs, Minimum order value und Payment methods:

Delivery time

Delivery time is 1-8 business days within Germany. Postal delivery time outside Germany may take longer.

Shipping area

We ship to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.

For shipping to Germany please use our german shop.

For a solution to Switzerland and Liechtenstein please see here.

We do not ship to the USA, France, Canada (including all overseas territories) and generally outside the EU.

Shipping costs

The shipping costs for Germany are 3,50 Euro. The shipping costs are waived from an order value of 180 Euro. For countries within the EU the shipping costs are 9,90 Euro. The shipping costs are waived from an order value of 300 Euro. We ask you to cover the cost of any return shipment yourself. Please note that customs fees may apply in third countries outside the European Union.

Minimum order value

The minimum order value is 25 Euro. Only from this amount you can use prepayment or PayPal and bank transfer as payment methods.

Maximum order value

The maximum order value for orders outside the EU is 1.000 Euro. The maximum order value within the EU is 12.500 Euro.

Payment in advance bank transfer

Please transfer the total amount with your order number to our account which you received in the confirmation email. Please note that bank transfers within Germany can take up to three working days. Transfers from abroad, especially from Austria and Switzerland, usually arrive very quickly. From other countries, transfers can take a little longer on average.

Payment in advance Paypal

At the end of the order process you will be redirected to the page of Paypal. There you can initiate your payment. As soon as the Paypal transaction is completed, the status of your order will change in the store. The goods will then be shipped as soon as possible.

Comparison

Comparison of e-bike tuning products

 

JUM-Ped

MTT

Badass Box

RedPed / BluePed /
GreenPed

VOLspeed

PearTune

SpeedBox

MBIQ

sIMPLEk

Sx2 Dongle

Type

Software (Module)
Software
(Controller)
Box Module Module Module Module (Kit)
Module /
Sensor
(Kit)
Module /
Dongle
Dongle
Range of functions ***** ***** * ***** **** *** *** *** *** / ** *

Easy installation of the tuning

***** ***** **** ** ** ** ** ** / * ** / * *

Invisible after installation

***** ***** * ***** ***** ***** ***** ***** ***** / **** ****

Switching on / off while riding

*
Gerät
*****
Gerät, Display
*
Box
*****
App, Display
*****
Display
*****
Display
*****
(App), Display
***
Display, Magnet
***** / ****
Display /
Dongle
****
Dongle, (Licht)

No more tuning Module at the bike

***** ***** ***** * * * * * * / **** ****

Invisible dismantling

***** ***** ***** ***** ***** ***** ***** ***** ***** / *** ***

Easy dismantling

***** ***** ***** ** ** ** ** ** / * ** / * *

Correct display of km/h

*****
Display
*****
Display
* *****
Display, App
*****
Display
*****
Display
*****
Display, App
* ****
Display
*

Dethrottling

***** ***** ***** ***** ***** ***** ***** ***** ***** *****

Reducing

* ***** * ***** ***** ***** ***** * * *

Price range in euros

169 to
209
189 to 299 149 to 154 219 to
239
159 to 179 139 to
259
139 to
309
89 to
199
89 to
209
139 to
159

Legend

Customer reviews
Warnings

Important: Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads. Legally permissible use is therefore only possible on private property or - if permitted - in competitions. Driving an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license as well as driving without insurance coverage. Tuning measures on the e-bike and e-scooter can lead to a loss of warranty rights and manufacturer warranties. In addition, tuning measures can lead to a loss of insurance coverage and accident victim assistance benefits in the event of accidents. The e-bike (or e-scooter) modified by tuning measures is exposed to an additional load due to the higher speed, which can lead to safety risks.

MBIQ-S Tuning Sensor for Bosch E-Bikes

MBIQ-S Tuning Sensor for Bosch E-Bikes

134,90 €
Pre-loader