New
PRE ORDER
OUT STOCK

MBIQ-P Plug-in solution for Bosch e-bikes

TYPE: Bosch Gen2, Bosch Gen3, Bosch Gen4

VENDOR: MBIQ

149,90 €

PRODUCT INFORMATION
Payment & Shipment
Comparison
Customer reviews
Warnings
PRODUCT INFORMATION

MBIQ-P plug-in solution for Bosch e-bikes

This is a microcontroller-based tuning tool in the form of a practical plug-in solution. The MBIQ-P removes the 25 km/h speed limit of Bosch e-bike mid-mounted motors completely. This allows the Bosch drive to develop its full power and you can ride much faster with full motor support. This tuning tool has no other functions.

Due to the use of original connectors, the installation of the MBIQ-P is quite simple. In principle, you just have to plug the sensor connector of the e-bike into the MBIQ-P.

This tuning tool does not require a separate power supply / battery. The evaluation of the motor software is not affected by the manipulated values

How it works

After the MBIQ-P has been plugged in, the tool analyses the current speed profile and transmits manipulated values. Speeds above 25 km/h are blocked for the motor firmware, so that there is no speed limit any more and the full potential of the motor can be used. Please note: Due to this special mode of operation, the displayed speed always remains ≤ 25 km/h when tuning is active). This means, from approx. 22 km/h onwards, the display only shows manipulated values.

Three operating modes:

This tuning tool is programmable: With the MBIQ-P, you have the option of setting three different operating modes by means of certain wheel movements when starting up the e-bike. You do not need any additional devices for this.

-Tuning permanently activated (permanent removal of the speed limit, the displayed speed no longer corresponds to the actual speed from approx. 25 km/h).

-Tuning permanently deactivated (engine support as normal up to 25 km/h, displayed speed corresponds to the real speed).

-Tuning activation after switch-on condition (tuning is always deactivated - but you can easily activate tuning by placing the magnet in front of the sensor for approx. 3-4 seconds during start-up).

Here you can find operating instructions (in German).

Simple installation

Installation of the tool is simple, as the MBIQ-P basically only needs to be inserted between the speed sensor (which works in conjunction with the magnet attached to the rear wheel) and the engine control unit. The tool is extremely compact and requires very little space, so it can easily be placed in the engine compartment.

To install the tuning tool, you need access to the plug end, which is plugged into the engine compartment. To gain access to the engine compartment, it is usually necessary to remove the left crank arm. Depending on the model, special tools may have to be used. Additional plastic covers may also have to be removed to gain access to the plug end.

Once this is done, carefully pull the plug out of the socket in the engine compartment. Insert the plug end of the sensor into the socket provided for this purpose on the MBIQ-P. The plug end that comes out must be inserted into the socket of the engine. The tuning is installed!

MBIQ-P plug-in solution for Bosch e-bikes - Compatibility

The MBIQ-P is compatible with most popular Bosch e-bike mid-mounted motors: Active Line, Active Line Plus, Performance Line, Performance Line CX.

Also compatible with Bosch Gen4 (model year 2021/2021).

This tuning tool is compatible with all common motor firmwares.

Not compatible with Bosch Smart System 2022 (BES3)!

Scope of delivery

-MBIQ-P Tuning Kit (cable length 60 cm).

Payment & Shipment

Delivery time, Shipping costs, Minimum order value und Payment methods:

Delivery time

Delivery time is 1-8 business days within Germany. Postal delivery time outside Germany may take longer.

Shipping area

We ship to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.

For shipping to Germany please use our german shop.

For a solution to Switzerland and Liechtenstein please see here.

We do not ship to the USA, France, Canada (including all overseas territories) and generally outside the EU.

Shipping costs

The shipping costs for Germany are 3,50 Euro. The shipping costs are waived from an order value of 180 Euro. For countries within the EU the shipping costs are 9,90 Euro. The shipping costs are waived from an order value of 300 Euro. We ask you to cover the cost of any return shipment yourself. Please note that customs fees may apply in third countries outside the European Union.

Minimum order value

The minimum order value is 25 Euro. Only from this amount you can use prepayment or PayPal and bank transfer as payment methods.

Maximum order value

The maximum order value for orders outside the EU is 1.000 Euro. The maximum order value within the EU is 12.500 Euro.

Payment in advance bank transfer

Please transfer the total amount with your order number to our account which you received in the confirmation email. Please note that bank transfers within Germany can take up to three working days. Transfers from abroad, especially from Austria and Switzerland, usually arrive very quickly. From other countries, transfers can take a little longer on average.

Payment in advance Paypal

At the end of the order process you will be redirected to the page of Paypal. There you can initiate your payment. As soon as the Paypal transaction is completed, the status of your order will change in the store. The goods will then be shipped as soon as possible.

Comparison

Comparison of e-bike tuning products

 

JUM-Ped

MTT

Badass Box

RedPed / BluePed /
GreenPed

VOLspeed

PearTune

SpeedBox

MBIQ

sIMPLEk

Sx2 Dongle

Type

Software (Module)
Software
(Controller)
Box Module Module Module Module (Kit)
Module /
Sensor
(Kit)
Module /
Dongle
Dongle
Range of functions ***** ***** * ***** **** *** *** *** *** / ** *

Easy installation of the tuning

***** ***** **** ** ** ** ** ** / * ** / * *

Invisible after installation

***** ***** * ***** ***** ***** ***** ***** ***** / **** ****

Switching on / off while riding

*
Gerät
*****
Gerät, Display
*
Box
*****
App, Display
*****
Display
*****
Display
*****
(App), Display
***
Display, Magnet
***** / ****
Display /
Dongle
****
Dongle, (Licht)

No more tuning Module at the bike

***** ***** ***** * * * * * * / **** ****

Invisible dismantling

***** ***** ***** ***** ***** ***** ***** ***** ***** / *** ***

Easy dismantling

***** ***** ***** ** ** ** ** ** / * ** / * *

Correct display of km/h

*****
Display
*****
Display
* *****
Display, App
*****
Display
*****
Display
*****
Display, App
* ****
Display
*

Dethrottling

***** ***** ***** ***** ***** ***** ***** ***** ***** *****

Reducing

* ***** * ***** ***** ***** ***** * * *

Price range in euros

169 to
209
189 to 299 149 to 154 219 to
239
159 to 179 139 to
259
139 to
309
89 to
199
89 to
209
139 to
159

Legend

Customer reviews
Warnings

Important: Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads. Legally permissible use is therefore only possible on private property or - if permitted - in competitions. Driving an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license as well as driving without insurance coverage. Tuning measures on the e-bike and e-scooter can lead to a loss of warranty rights and manufacturer warranties. In addition, tuning measures can lead to a loss of insurance coverage and accident victim assistance benefits in the event of accidents. The e-bike (or e-scooter) modified by tuning measures is exposed to an additional load due to the higher speed, which can lead to safety risks.

MBIQ-P Plug-in solution for Bosch e-bikes

MBIQ-P Plug-in solution for Bosch e-bikes

149,90 €
Pre-loader