MBIQ-S Ebike Tuning for ANANDA mid-mounted motors

TYPE: Ananda


134,90 €

Payment & Shipment
Customer reviews

MBIQ-S Ebike Tuning for ANANDA mid-mounted motors

A microcontroller-based tuning tool for e-bikes with ANANDA mid-mounted motors that completely removes the 25 km/h speed limit. The tool comes as a ready-to-use sensor solution that simply needs to be exchanged for the existing speed sensor. As a result, you can ride much faster than before with full motor assistance.

The tuning can be activated / deactivated (programming) by means of certain wheel movements when raising the e-bike. Neither a PC nor a smartphone are needed to control the tuning.

In addition, the MBIQ-S is completely maintenance-free and does not require its own battery.

Thanks to the compactly integrated electronics, the tuning of the MBIQ-S takes place in the smallest installation space. Since a sensor similar to the original sensor is used, there are virtually no optical changes to the e-bike.

The electronics of the MBIQ-S are cast into the housing and thus protected from moisture.

How it works

After connection, the MBIQ-S will analyse the current speed profile, process it and - if tuning is active - output manipulated values. As a result, the preset 25 km/h speed limit can be exceeded - this enables much faster driving with full motor support.

Important note: Due to this special functional principle, the speed display is "frozen" at approx. 20 km/h on the display when driving >25 km/h (depending on the model). The same value is then always displayed at higher speeds. The total kilometres are then also lower for this range.

A speed halving, as known from some other tuning tools, does not take place with the MBIQ-S.

Programmable by the customer

With the MBIQ-S, three operating modes can be switched on, allowing the tuning to be switched on and off as required. Programming is done when the e-bike is switched on by certain wheel movements that move the magnet along the sensor. The set operating mode is indicated by the display of different speed values on the display. The following operating modes are available for selection:

Tuning permanently activated (the speed limit is permanently removed, from approx. 25 km/h the displayed speed is "frozen").

Tuning permanently deactivated (the speed limit is not lifted, engine support up to 25 km/h with real speed display).

Activation after switch-on condition: To switch on tuning, the magnet must be in front of the sensor for at least 4 seconds during start-up, otherwise tuning is deactivated. Here you can decide spontaneously when switching on whether the tuning should be active or not.

The operating instructions explain in detail how to set the various operating modes.

In a similar way, you can also set the limit value up to which speed the motor should be supported (setting the maximum support speed).


This Tuning Tool is a replacement sensor: This means that the existing original sensor of the e-bike has to be replaced with the MBIQ-S. The MBIQ-S can be installed in the same way as the Tuning Tool. Since the Tuning Tool is equipped with the same connectors, an optimal connection is ensured.

You will find the original sensor on the rear frame, where it works in conjunction with the magnet attached to the rear wheel.

Tip: When pulling out the original sensor, pull through a suitable pull wire along which you can thread the tuning tool.

Note: On some models the magnet is also positioned at the height of the mating axle. If this is the case, you will have to remove the rear wheel to install the tuning tool.

This requires a little technical skill. You will find more detailed information on installation in the installation instructions.

You can simply keep the original sensor in case you want to restore your e-bike to its original condition at some point.

MBIQ-S Ebike Tuning for ANANDA mid-mounted motors - Compatibility

ANANDA e-bike mid-mounted motors with the 3-pole connector shown above - e.g.:

-Ananda M80

-ANANDA AM80 Agile


The tuning tool is compatible with the common motor firmwares of the manufacturers. The evaluation of the engine software is not affected by the manipulated values.

Please check the compatibility of the plug and the sensor in advance!

MBIQ-S Ebike Tuning for ANANDA mid-mounted motors - Technical data

Functional principle: speed manipulation (no halving).

Connection type: exchange sensor.

Connection length: approx. 25 cm.

Display: Manipulated values from approx. 22 km/h.

Tuning can be switched on and off (programmable).

Power supply: Not necessary, as the supply is passive via the sensor path.

Weight approx. 12 g.

Payment & Shipment

Delivery time, Shipping costs, Minimum order value und Payment methods:

Delivery time

Delivery time is 1-8 business days within Germany. Postal delivery time outside Germany may take longer.

Shipping area

We ship to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.

For shipping to Germany please use our german shop.

For a solution to Switzerland and Liechtenstein please see here.

We do not ship to the USA, France, Canada (including all overseas territories) and generally outside the EU.

Shipping costs

The shipping costs for Germany are 3,50 Euro. The shipping costs are waived from an order value of 180 Euro. For countries within the EU the shipping costs are 9,90 Euro. The shipping costs are waived from an order value of 300 Euro. We ask you to cover the cost of any return shipment yourself. Please note that customs fees may apply in third countries outside the European Union.

Minimum order value

The minimum order value is 25 Euro. Only from this amount you can use prepayment or PayPal and bank transfer as payment methods.

Maximum order value

The maximum order value for orders outside the EU is 1.000 Euro. The maximum order value within the EU is 12.500 Euro.

Payment in advance bank transfer

Please transfer the total amount with your order number to our account which you received in the confirmation email. Please note that bank transfers within Germany can take up to three working days. Transfers from abroad, especially from Austria and Switzerland, usually arrive very quickly. From other countries, transfers can take a little longer on average.

Payment in advance Paypal

At the end of the order process you will be redirected to the page of Paypal. There you can initiate your payment. As soon as the Paypal transaction is completed, the status of your order will change in the store. The goods will then be shipped as soon as possible.


Comparison of e-bike tuning products




Badass Box

RedPed / BluePed /






Sx2 Dongle


Software (Module)
Box Module Module Module Module (Kit)
Module /
Module /
Range of functions ***** ***** * ***** **** *** *** *** *** / ** *

Easy installation of the tuning

***** ***** **** ** ** ** ** ** / * ** / * *

Invisible after installation

***** ***** * ***** ***** ***** ***** ***** ***** / **** ****

Switching on / off while riding

Gerät, Display
App, Display
(App), Display
Display, Magnet
***** / ****
Display /
Dongle, (Licht)

No more tuning Module at the bike

***** ***** ***** * * * * * * / **** ****

Invisible dismantling

***** ***** ***** ***** ***** ***** ***** ***** ***** / *** ***

Easy dismantling

***** ***** ***** ** ** ** ** ** / * ** / * *

Correct display of km/h

* *****
Display, App
Display, App
* ****


***** ***** ***** ***** ***** ***** ***** ***** ***** *****


* ***** * ***** ***** ***** ***** * * *

Price range in euros

169 to
189 to 299 149 to 154 219 to
159 to 179 139 to
139 to
89 to
89 to
139 to


Customer reviews

Important: Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads. Legally permissible use is therefore only possible on private property or - if permitted - in competitions. Driving an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license as well as driving without insurance coverage. Tuning measures on the e-bike and e-scooter can lead to a loss of warranty rights and manufacturer warranties. In addition, tuning measures can lead to a loss of insurance coverage and accident victim assistance benefits in the event of accidents. The e-bike (or e-scooter) modified by tuning measures is exposed to an additional load due to the higher speed, which can lead to safety risks.

MBIQ-S Ebike Tuning for ANANDA mid-mounted motors

MBIQ-S Ebike Tuning for ANANDA mid-mounted motors

134,90 €