VOLspeed V3 for Yamaha PW-X3 / PW-S2
TYPE: Yamaha Powerdrive
VENDOR: VOLspeed
VOLspeed V3 for Yamaha PW-X3 / PW-S2
The VOLspeed V3 is one of the most interesting and versatile tuning tools for Yamaha PW-X3 & PW-S2 e-bike drive systems ever. With this module you can optimise your e-bike in many ways.
The core function is of course the removal of the 25 km/h speed limit. But with this tuning module you have the additional advantage that you can freely set the maximum supported speed to any value between 25 km/h and 45 km/h. This means that you can adjust the maximum speed as required. If necessary, you can also increase the maximum speed only slightly, e.g. from 25 km/h to 34 km/h. You then benefit from a significantly faster riding style, but the battery consumption is still only moderately increased.
Reduced "Wall Effect”
A real special feature of the VOLspeed modules is that you can also set a "softer deceleration behaviour" (dynamic mode). In this case, the motor support does not stop so abruptly when the set maximum speed is reached. This reduces the annoying "wall effect" and you can ride in a much more relaxed way.
The VOLspeed V3 module can be operated comfortably via the control buttons of your e-bike, you do not need a smartphone or PC. Of course, the tuning can be switched on and off at any time.
Both the current speed and the distance covered are shown correctly on the e-bike display, even when tuning is active. The remaining range calculation is very accurate, as a wide range of parameters are taken into account (see below). You can even adjust the wheel circumference to optimise the accuracy of the displayed speed/distance.
New in the third version of the module is the option to set your own code for activation. In addition, no setup is required after installation; the module is immediately ready for use.
In short, the VOLspeed V3 offers an extremely wide range of optimisation options that allow you to get the very best out of your Yamaha PW-X3 e-bike drive.
The VOLspeed module is installed on the motor and is then invisible from the outside. No cables need to be damaged or modified, the module is simply plugged in and is immediately ready for operation.
No PC or smartphone is required for operation. All settings are made conveniently via the display on the e-bike. Please note: With Interface X, the operating statuses and setting values are displayed via the battery LEDs.
VOLspeed-V3 for Yamaha-PW-X3 / PW-S2 - All advantages at a glance:
-The 25 km/h speed limit is removed (the maximum supported speed is 45 km/h).
-Maximum speed can be freely set to an individual value from 25 km/h to 45 km/h. This is done simply using the arrow keys on the e-bike (the last value set remains saved).
-Tuning can be conveniently switched on and off using the arrow keys (after switching on the e-bike, the tuning is initially always switched off).
-Individual activation code can be set (protects against unauthorised access). Please note: An additional display is required for Interface X.
-Setting of a softer deceleration behaviour possible: In the optional "dynamic mode", the motor no longer stops so abruptly when the set maximum speed is reached (reduced "wall effect").
![Dynamikmodus Dynamikmodus](https://www.volspeed.de/WebRoot/Store25/Shops/83313866/MediaGallery/Dynamikmode.jpg)
-Correct display of speed, distance covered, average and maximum speed.
-Optimised remaining range calculation: When tuning is active, the calculation takes into account not only the battery charge level and the selected assistance level, but also the current riding style and battery consumption.
-Correct total kilometre value even after removal of the tuning module, as the PearTune module tracks the kilometres in the motor control unit.
-Adjustable wheel circumference (+/- 10%). This allows the accuracy of the speed display and distance measurement to be optimised.
-Automatic initialisation: The VOLspeed V3 module is immediately ready for use after installation.
-Neither smartphone nor PC are required to use the VOLspeed module.
VOLspeed-V3 for Yamaha PW-X3 / PW-S2 - Compatibility
This VOLspeed module is only compatible with the Yamaha PW-X3 e-bike drive system from model year 2022 onwards (Haibike). Also compatible with Yamaha PW-S2 drive systems.
Compatible displays: Sideswitch (Display A), Multiswitch (Display C) and Display X.
Compatible with Interface X.
Not compatible with the Yamaha MORO 07.
Not compatible with Giant Syncdrive e-bike engines.
If you have a different Yamaha drive, please choose the
VOLspeed-V3 for Yamaha PW-X / PW-X2 / PW-SE / PW-ST / PW-TE / PW-CE
or the
VOLspeed for Yamaha PW / Powerdrive
Attention: Not compatible with Yamaha brand eBikes, e.g.:
Yamaha Moro 07
Yamaha CrossCore RC
Yamaha Wabash RT
Yamaha Booster / Booster Easy
Scope of delivery
-VOLspeed V3 tuning module
-Installation and operating instructions
Technical data
Housing dimensions: 37mm x 19mm x 9mm
Cable length: approx. 140mm
Weight: 0,025kg
Power consumption: 0.1W
Supply voltage: 5VDC
Installation
VOLspeed V3 is a tuning module that must be connected to the e-bike motor. No cables need to be damaged or modified. The module simply needs to be plugged in and is then immediately ready for operation. After installation, the module is not visible from the outside, so the appearance of the e-bike is not changed.
To install the module, a crank and the motor cover must be temporarily removed.
Required tools
Allen key 2.5 mm, 3 mm & 8 mm, possibly ISIS/Octalink crank puller
Here you can see an installation example on a Haibike AllTrail 7 2022 e-bike with Yamaha PW-X3 motor:
Delivery time, Shipping costs, Minimum order value und Payment methods:
Delivery time
Delivery time is 1-8 business days within Germany. Postal delivery time outside Germany may take longer.
Shipping area
We ship to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.
For shipping to Germany please use our german shop.
For a solution to Switzerland and Liechtenstein please see here.
We do not ship to the USA, France, Canada (including all overseas territories) and generally outside the EU.
Shipping costs
The shipping costs for Germany are 3,50 Euro. The shipping costs are waived from an order value of 180 Euro. For countries within the EU the shipping costs are 9,90 Euro. The shipping costs are waived from an order value of 300 Euro. We ask you to cover the cost of any return shipment yourself. Please note that customs fees may apply in third countries outside the European Union.
Minimum order value
The minimum order value is 25 Euro. Only from this amount you can use prepayment or PayPal and bank transfer as payment methods.
Maximum order value
The maximum order value for orders outside the EU is 1.000 Euro. The maximum order value within the EU is 12.500 Euro.
Payment in advance bank transfer
Please transfer the total amount with your order number to our account which you received in the confirmation email. Please note that bank transfers within Germany can take up to three working days. Transfers from abroad, especially from Austria and Switzerland, usually arrive very quickly. From other countries, transfers can take a little longer on average.
Payment in advance Paypal
At the end of the order process you will be redirected to the page of Paypal. There you can initiate your payment. As soon as the Paypal transaction is completed, the status of your order will change in the store. The goods will then be shipped as soon as possible.
Comparison of e-bike tuning products
Type |
Software | (Module) Software (Controller) |
Box | Module | Module | Module | Module | (Kit) Module / Sensor |
(Kit) Module / Dongle |
Dongle |
Range of functions | ***** | ***** | * | ***** | **** | *** | *** | *** | *** / ** | * |
Easy installation of the tuning |
***** | ***** | **** | ** | ** | ** | ** | ** / * | ** / * | * |
Invisible after installation |
***** | ***** | * | ***** | ***** | ***** | ***** | ***** | ***** / **** | **** |
Switching on / off while riding |
* Gerät |
***** Gerät, Display |
* Box |
***** App, Display |
***** Display |
***** Display |
***** (App), Display |
*** Display, Magnet |
***** / **** Display / Dongle |
**** Dongle, (Licht) |
No more tuning Module at the bike |
***** | ***** | ***** | * | * | * | * | * | * / **** | **** |
Invisible dismantling |
***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** / *** | *** |
Easy dismantling |
***** | ***** | ***** | ** | ** | ** | ** | ** / * | ** / * | * |
Correct display of km/h |
***** Display |
***** Display |
* | ***** Display, App |
***** Display |
***** Display |
***** Display, App |
* | **** Display |
* |
Dethrottling |
***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** |
Reducing |
* | ***** | * | ***** | ***** | ***** | ***** | * | * | * |
Price range in euros |
169 to 209 |
189 to 299 | 149 to 154 | 219 to 239 |
159 to 179 | 139 to 259 |
139 to 309 |
89 to 199 |
89 to 209 |
139 to 159 |
Important: Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads. Legally permissible use is therefore only possible on private property or - if permitted - in competitions. Driving an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license as well as driving without insurance coverage. Tuning measures on the e-bike and e-scooter can lead to a loss of warranty rights and manufacturer warranties. In addition, tuning measures can lead to a loss of insurance coverage and accident victim assistance benefits in the event of accidents. The e-bike (or e-scooter) modified by tuning measures is exposed to an additional load due to the higher speed, which can lead to safety risks.