MBIQ-P for Shimano EP8 / EP800 / EP8-RS

MBIQ-P for Shimano EP8 / EP800 / EP8-RS

With this ingenious tuning tool, not only can the 25 km/h speed limit of Shimano EP8 e-bikes be lifted, you can even set the top speed individually.

The MBIQ-P is a practical plugin solution that has to be inserted between the speed sensor and the motor control. For this purpose, the tuning tool has been equipped with the same connectors as the existing sensor cable. Thanks to its compactness, the tool requires very little installation space. Of course, the MBIQ-P can be removed again at any time if you want to restore the e-bike to its original condition.

After connection, the MBIQ-P analyses and processes the current speed profile. If tuning is active, the device will output manipulated values so that the 25 km/h speed limit is lifted.

The MBIQ-P works microcontroller-based and is programmable by the customer, completely without a PC or smartphone. Programming is done by means of certain wheel movements when the e-bike is started up. This allows tuning to be switched on and off - or permanently activated if desired. In addition, there is now (for the first time on the MBIQ-P) the option to increase the level of maximum support in several stages to an individual value.

This tuning tool is completely maintenance-free and does not require its own battery!

Please note: When tuning is active, the speed indication in the display is "frozen" from a speed of approx. 23 km/h onwards, so that the displayed speed does not exceed a value of 25 km/h - even if you are actually riding much faster. Tip: Simply use GPS-capable additional devices such as smartphones if you want to have the real speed displayed while you are on the road. You can find practical smartphone holders for the handlebars in our shop.

Tuning can be switched on and off

The MBIQ-P is customer programmable so that different operating modes can be set. This gives you the option of switching the tuning on or off.

Programming is done by means of certain wheel movements when the bike is started up. Three different operating modes can be set:

-Mode 1: Tuning permanently activated (25 km/h speed limit is lifted, from approx. 23 km/h the displayed speed is "frozen").

-Mode 2: Tuning permanently deactivated (motor support normal up to 25 km/h, correct speed display).

-Mode 3: Activation after switch-on condition. In this mode, you can determine whether the tuning should be active or not by means of certain movements of the spoke magnet along the sensor (when the e-bike is switched on).

Installation

The MBIQ-P is a plug-in solution that must be inserted into the existing speed sensor's line. Thanks to compatible connectors that are identical to those of the existing sensor line, an optimal connection is ensured. For installation, the plastic cover of the motor must be removed briefly.

MBIQ-P for Shimano EP8 / EP800 / EP8-RS - Data at a glance

-Speed limit is completely cancelled.

-Programmable by the customer (without additional devices).

-Tuning can be switched on and off.

-Maximum support: Programmable in steps.

-Connection type: Plug-in solution, the tool is plugged in between the motor and the sensor.

-The MBIQ-P is very small and requires little installation space.

-Display: When tuning is active, displayed speed is "frozen" from approx. 23 km/h.

-The tool is completely maintenance-free.

-No separate power supply / battery required.

-Weight: Only approx. 5g.

-Connection length: Approx. 15 cm.

MBIQ-P for Shimano EP8 / EP800 / EP8-RS - Compatibility

This MBIQ-P is compatible with the following Shimano mid-mounted motors:

-All EP8 / EP800 motors (DU-EP800)...

-EP8 motors with RS firmware (EP8 RS)

-Also compatible with Di2!

Important: Only compatible with EP-8(00) - Not compatible with EP-801 !

-Note: Firmware compatibility has been successfully tested up to (and including) FW 4.1.8.