New
PRE ORDER
OUT STOCK

sIMPLEk Stick Pro for Brose

TYPE: Brose

VENDOR: sIMPLEk

169,00 €

maestro
master
paypal
sofort
visa
apple_pay
google_pay
PRODUCT INFORMATION
Payment & Shipment
Comparison
Customer reviews
Warnings
PRODUCT INFORMATION

sIMPLEk Stick Pro for Brose

If you are annoyed by the speed limit of your Brose e-bike drive system, the sIMPLEk Stick Pro is a good solution. It is a tuning tool that completely removes the 25 km/h (or 45 km/h) speed limit of the motor - no more, no less. As soon as you have attached the wiring and plugged in the sIMPLEk Stick Pro, the tuning mode is activated and you benefit from virtually unlimited support. Since this tool is a dongle with a USB connection, you can pull off all the tuning-related parts within seconds.

The installation of this tuning tool is uncomplicated (see below).

Important note: This sIMPLEk stick is the "Pro" version and therefore a finished product - you do not need to assemble the tool yourself.

Made in Germany.

Real speed remains readable

Even with active tuning, the real speed remains readable in the e-bike display, albeit (from a speed of 10 km/h) via the second digit and the decimal place of the speed display - so a display of 13.6 km/h would correspond to a speed of 36 km/h in reality, etc.

The maximum speed and the kilometres travelled are also displayed correctly, even if these values are only adjusted after approx. 1 minute at a standstill.

Simple installation

The installation of this tuning dongle is uncomplicated and can also be carried out by laymen with a little technical skill. Proceed as follows:

-First remove the battery.

-Loosen the 8 mm hexagon socket screw on the crank of your e-bike with an 8 mm hexagon socket spanner. Remove the crank (use a crank puller if it cannot be removed by hand).

-Remove the 5 Torx screws on the motor cover with a Torx 20 socket spanner and remove them.

-Unplug the speed sensor connector.

-Now you have to cut the speed sensor cable so that you can connect the individual wires to the cutting clamp of the connection cable. The ends of the cable must be inserted into the insulation displacement connector - make sure that the polarity is correct.

-Fix the cables by pressing the cutting clamp together.

-Now you only have to lay the USB connection cable to the desired position of the sIMPLEk Stick Pro using the cable ties provided.

-Reassemble everything.

When used for the first time, a one-time calibration is automatically carried out so that the correct speed can be read for each wheel circumference (see operating instructions).

sIMPLEk Stick Pro for Brose - Compatibility

All e-bikes with Brose motors.

Payment & Shipment

Delivery time, Shipping costs, Minimum order value und Payment methods:

Delivery time

Delivery time is 1-8 business days within Germany. Postal delivery time outside Germany may take longer.

Shipping area

We ship to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.

For shipping to Germany please use our german shop.

For a solution to Switzerland and Liechtenstein please see here.

We do not ship to the USA, France, Canada (including all overseas territories) and generally outside the EU.

Shipping costs

The shipping costs for Germany are 3,50 Euro. The shipping costs are waived from an order value of 180 Euro. For countries within the EU the shipping costs are 9,90 Euro. The shipping costs are waived from an order value of 300 Euro. We ask you to cover the cost of any return shipment yourself. Please note that customs fees may apply in third countries outside the European Union.

Minimum order value

The minimum order value is 25 Euro. Only from this amount you can use prepayment or PayPal and bank transfer as payment methods.

Maximum order value

The maximum order value for orders outside the EU is 1.000 Euro. The maximum order value within the EU is 12.500 Euro.

Payment in advance bank transfer

Please transfer the total amount with your order number to our account which you received in the confirmation email. Please note that bank transfers within Germany can take up to three working days. Transfers from abroad, especially from Austria and Switzerland, usually arrive very quickly. From other countries, transfers can take a little longer on average.

Payment in advance Paypal

At the end of the order process you will be redirected to the page of Paypal. There you can initiate your payment. As soon as the Paypal transaction is completed, the status of your order will change in the store. The goods will then be shipped as soon as possible.

Comparison

Comparison of e-bike tuning products

 

JUM-Ped

MTT

Badass Box

RedPed / BluePed /
GreenPed

VOLspeed

PearTune

SpeedBox

MBIQ

sIMPLEk

Sx2 Dongle

Type

Software (Module)
Software
(Controller)
Box Module Module Module Module (Kit)
Module /
Sensor
(Kit)
Module /
Dongle
Dongle
Range of functions ***** ***** * ***** **** *** *** *** *** / ** *

Easy installation of the tuning

***** ***** **** ** ** ** ** ** / * ** / * *

Invisible after installation

***** ***** * ***** ***** ***** ***** ***** ***** / **** ****

Switching on / off while riding

*
Gerät
*****
Gerät, Display
*
Box
*****
App, Display
*****
Display
*****
Display
*****
(App), Display
***
Display, Magnet
***** / ****
Display /
Dongle
****
Dongle, (Licht)

No more tuning Module at the bike

***** ***** ***** * * * * * * / **** ****

Invisible dismantling

***** ***** ***** ***** ***** ***** ***** ***** ***** / *** ***

Easy dismantling

***** ***** ***** ** ** ** ** ** / * ** / * *

Correct display of km/h

*****
Display
*****
Display
* *****
Display, App
*****
Display
*****
Display
*****
Display, App
* ****
Display
*

Dethrottling

***** ***** ***** ***** ***** ***** ***** ***** ***** *****

Reducing

* ***** * ***** ***** ***** ***** * * *

Price range in euros

169 to
209
189 to 299 149 to 154 219 to
239
159 to 179 139 to
259
139 to
309
89 to
199
89 to
209
139 to
159

Legend

Customer reviews
Warnings

Important: Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads. Legally permissible use is therefore only possible on private property or - if permitted - in competitions. Driving an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license as well as driving without insurance coverage. Tuning measures on the e-bike and e-scooter can lead to a loss of warranty rights and manufacturer warranties. In addition, tuning measures can lead to a loss of insurance coverage and accident victim assistance benefits in the event of accidents. The e-bike (or e-scooter) modified by tuning measures is exposed to an additional load due to the higher speed, which can lead to safety risks.

sIMPLEk Stick Pro for Brose

sIMPLEk Stick Pro for Brose

169,00 €
Pre-loader