New
PRE ORDER
OUT STOCK

PearTune MSO 3.0 Tuning for Bafang M200, M300, M400 and M420 with UART

TYPE: Bafang

VENDOR: PearTune

159,00 €

maestro
master
paypal
sofort
visa
apple_pay
google_pay
PRODUCT INFORMATION
Payment & Shipment
Comparison
Customer reviews
Warnings
PRODUCT INFORMATION

PearTune MSO 3.0 Tuning for Bafang M200, M300, M400 and M420 with UART

With this tuning tool, the 25 km/h speed limit of your Bafang M200, M300, M400 & M420 e-bike can be completely switched off. So you can finally decide for yourself how fast you ride, and there is no more annoying speed limit.

Please note that the e-bike display will only show half of the real values when tuning is active (halved speed etc.).


Tuning can be switched on and off

Even while riding, you can easily switch the tuning on and off using the light button on your Bafang e-bike. When switching on, a short "9.9" display shows that the tuning has been activated (no more speed limit). If you switch the tuning off again, a short display of the value "2.5" confirms that the speed limit ends at 25 km/h again. The original function of the control buttons remains unchanged.


Installation

PearTune MSO is a tuning module that has to be connected to the e-bike drive by means of compatible original connectors (between magnetic speed sensor / speedometer and motor unit as well as between display and motor unit). After installation, the module configures itself; you do not have to carry out any complicated set-up.

To connect the PearTune module, you have to remove the plastic cover of the motor unit for a short time.

As the power is supplied via the display power supply, the PearTune module does not need its own battery.


Important notes:

If you want to install the PearTune MSO module in a brand new Bafang e-bike, you must first ride the bike for at least 1 km before installing the tuning tool.

If you ride above 25 km/h with motor assistance for a longer period of time, some data on the display may no longer be shown correctly immediately. However, after you have ridden a certain amount of time below 25 km/h or without motor assistance, these values will be displayed correctly again.

After a long ride at high speed, we recommend not to switch off the e-bike immediately. It is best to wait until the e-bike switches itself off automatically - or to leave the bike switched on after finishing the ride until a value of 0.0 km/h is displayed.

Please note:

The version offered here is the "normal" version of the PearTune 3.0 tuning module, where you can switch the tuning on and off via the control buttons of the e-bike. If you would like to order the module in the "Still ON" version, where the tuning is always active as soon as you switch on the e-bike, please contact our customer service (team@ebiketuningshop.com). The Still ON version is interesting for owners of Bafang e-bikes without the required control buttons.


PearTune MSO 3.0 Tuning for Bafang M200, M300, M400 and M420 with UART - Compatibility

This tuning tool is compatible with Bafang M200, M300, M400 & M420 e-bikes with UART (see display connector product photo 2 for comparison).

Compatible with all displays for M300, M400 & M420 with UART.

Tip:

If you have a Bafang M200, M300, M400 or M20 e-bike with CAN bus (4 pin speed sensor on the motor), you need the::

“PearTune MSO 4.0 Tuning for Bafang M200, M300, M400 & M420 with CAN Bus”.

By the way, the display is identical in both cases - no matter whether the Bafang e-bike is equipped with CAN bus or UART.

Note: The Bafang M420 drive is usually equipped with CAN bus, whereas the Bafang M300 and M400 drives are usually equipped with UART. However, this is not always the case.

Payment & Shipment

Delivery time, Shipping costs, Minimum order value und Payment methods:

Delivery time

Delivery time is 1-8 business days within Germany. Postal delivery time outside Germany may take longer.

Shipping area

We ship to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.

For shipping to Germany please use our german shop.

For a solution to Switzerland and Liechtenstein please see here.

We do not ship to the USA, France, Canada (including all overseas territories) and generally outside the EU.

Shipping costs

The shipping costs for Germany are 3,50 Euro. The shipping costs are waived from an order value of 180 Euro. For countries within the EU the shipping costs are 9,90 Euro. The shipping costs are waived from an order value of 300 Euro. We ask you to cover the cost of any return shipment yourself. Please note that customs fees may apply in third countries outside the European Union.

Minimum order value

The minimum order value is 25 Euro. Only from this amount you can use prepayment or PayPal and bank transfer as payment methods.

Maximum order value

The maximum order value for orders outside the EU is 1.000 Euro. The maximum order value within the EU is 12.500 Euro.

Payment in advance bank transfer

Please transfer the total amount with your order number to our account which you received in the confirmation email. Please note that bank transfers within Germany can take up to three working days. Transfers from abroad, especially from Austria and Switzerland, usually arrive very quickly. From other countries, transfers can take a little longer on average.

Payment in advance Paypal

At the end of the order process you will be redirected to the page of Paypal. There you can initiate your payment. As soon as the Paypal transaction is completed, the status of your order will change in the store. The goods will then be shipped as soon as possible.

Comparison

Comparison of e-bike tuning products

 

JUM-Ped

MTT

Badass Box

RedPed / BluePed /
GreenPed

VOLspeed

PearTune

SpeedBox

MBIQ

sIMPLEk

Sx2 Dongle

Type

Software (Module)
Software
(Controller)
Box Module Module Module Module (Kit)
Module /
Sensor
(Kit)
Module /
Dongle
Dongle
Range of functions ***** ***** * ***** **** *** *** *** *** / ** *

Easy installation of the tuning

***** ***** **** ** ** ** ** ** / * ** / * *

Invisible after installation

***** ***** * ***** ***** ***** ***** ***** ***** / **** ****

Switching on / off while riding

*
Gerät
*****
Gerät, Display
*
Box
*****
App, Display
*****
Display
*****
Display
*****
(App), Display
***
Display, Magnet
***** / ****
Display /
Dongle
****
Dongle, (Licht)

No more tuning Module at the bike

***** ***** ***** * * * * * * / **** ****

Invisible dismantling

***** ***** ***** ***** ***** ***** ***** ***** ***** / *** ***

Easy dismantling

***** ***** ***** ** ** ** ** ** / * ** / * *

Correct display of km/h

*****
Display
*****
Display
* *****
Display, App
*****
Display
*****
Display
*****
Display, App
* ****
Display
*

Dethrottling

***** ***** ***** ***** ***** ***** ***** ***** ***** *****

Reducing

* ***** * ***** ***** ***** ***** * * *

Price range in euros

169 to
209
189 to 299 149 to 154 219 to
239
159 to 179 139 to
259
139 to
309
89 to
199
89 to
209
139 to
159

Legend

Customer reviews
Warnings

Important: Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads. Legally permissible use is therefore only possible on private property or - if permitted - in competitions. Driving an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license as well as driving without insurance coverage. Tuning measures on the e-bike and e-scooter can lead to a loss of warranty rights and manufacturer warranties. In addition, tuning measures can lead to a loss of insurance coverage and accident victim assistance benefits in the event of accidents. The e-bike (or e-scooter) modified by tuning measures is exposed to an additional load due to the higher speed, which can lead to safety risks.

PearTune MSO 3.0 Tuning for Bafang M200, M300, M400 and M420 with UART

PearTune MSO 3.0 Tuning for Bafang M200, M300, M400 and M420 with UART

159,00 €
Pre-loader