New
PRE ORDER
OUT STOCK

MBIQ-S Tuning Sensor for AEG / Bafang / Prophete with 4pin plug blue (HIGO)

TYPE: AEG, Bafang

VENDOR: MBIQ

149,90 €

PRODUCT INFORMATION
Payment & Shipment
Comparison
Customer reviews
Warnings
PRODUCT INFORMATION

MBIQ-S Tuning Sensor for AEG / Bafang / Prophete with 4pin plug blue (HIGO)

A practical tuning tool in the form of a ready-made sensor solution. The MBIQ-S completely removes the 25 km/h speed limit of e-bike drives - which means you can finally use the full potential of your e-bike motor! To install it, simply replace the original speed sensor with the MBIQ-S. If necessary, the original condition of the e-bike can be restored at any time. The tuning sensor is programmable by the customer so that the tuning can be switched on and off. The MBIQ-S operates on a microcontroller basis and does not require its own battery.

The MBIQ-S is made in Germany.

How it works

After installation, the MBIQ-S analyses the current speed profile and, if tuning is active, outputs manipulated values. More precisely, speeds above 25 km/h are blocked for the engine firmware, so that the speed limit is removed. This allows you to drive much faster with full engine support.

Please note: Due to this special functional principle, the e-bike display, from a speed of approx. 22 km/h, only shows manipulated values (provided the tuning is switched on). From 22 km/h, the correct speed is therefore no longer displayed.

By the way, the evaluation of the motor software is not affected by the manipulated values ("anti-tuning ready").

Programmable by the customer

Unlike the previous models, the MBIQ-S can be programmed by the customer. This gives you the option of switching the tuning on or off as needed. A total of three different operating modes are available, which can be switched on by certain sequential wheel movements when the e-bike is switched on. You don't need a PC or smartphone for programming. You have three different operating modes to choose from:

Mode 1: Tuning permanently activated (the speed limit is permanently removed, no correct speed display from approx. 22 km/h).

Mode 2: Tuning permanently deactivated (motor support only up to 25 km/h, correct speed display).

Mode 3: Tuning after switch-on condition: Here, the magnet can be used to determine whether the tuning should be switched on or not when the e-bike is started up (to activate the tuning, the magnet must be in front of the sensor for at least 4 seconds during start-up - otherwise the tuning remains deactivated).

If done correctly, the display shows the set operating mode by briefly displaying certain speed values.

Here you can find operating instructions (in German).

Installation

The installation of this tuning tool is simple, as you only have to replace the original speed sensor with the MBIQ-S. With a little manual skill, this can also be done yourself. You can keep the original sensor in case you want to restore the e-bike to its original condition at some point.

Please note that the motor cover must be removed briefly to install the MBIQ-S. This is the only way to gain access to the plug end, which is plugged into the engine compartment.

The appearance of the e-bike is not changed by the installation, as the MBIQ-S looks very similar to the original sensor.

MBIQ-S Tuning Sensor - Compatibility

This tuning tool is compatible with many e-bike mid-mounted motors with 4-pin blue connector (HIPO), e.g. AEG Comfort Drive, Bafang, Prophete e-bikes...

The MBIQ-S is compatible with all common motor firmwares of the respective manufacturers.

MBIQ-S Tuning Sensor for AEG / Bafang / Prophete with 4pin plug blue (HIGO) - Technical Data

Type of connection: exchange sensor.

Functional principle: Speed manipulation (no halving).

Display: Manipulated values from approx. 22 km/h.

Connection length: Approx. 55 cm.

Can be switched on/off: Yes, via programming.

Power supply: No battery necessary, the MBIQ-S is passively supplied via the sensor path.

Weight: approx. 15 g.

Payment & Shipment

Delivery time, Shipping costs, Minimum order value und Payment methods:

Delivery time

Delivery time is 1-8 business days within Germany. Postal delivery time outside Germany may take longer.

Shipping area

We ship to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.

For shipping to Germany please use our german shop.

For a solution to Switzerland and Liechtenstein please see here.

We do not ship to the USA, France, Canada (including all overseas territories) and generally outside the EU.

Shipping costs

The shipping costs for Germany are 3,50 Euro. The shipping costs are waived from an order value of 180 Euro. For countries within the EU the shipping costs are 9,90 Euro. The shipping costs are waived from an order value of 300 Euro. We ask you to cover the cost of any return shipment yourself. Please note that customs fees may apply in third countries outside the European Union.

Minimum order value

The minimum order value is 25 Euro. Only from this amount you can use prepayment or PayPal and bank transfer as payment methods.

Maximum order value

The maximum order value for orders outside the EU is 1.000 Euro. The maximum order value within the EU is 12.500 Euro.

Payment in advance bank transfer

Please transfer the total amount with your order number to our account which you received in the confirmation email. Please note that bank transfers within Germany can take up to three working days. Transfers from abroad, especially from Austria and Switzerland, usually arrive very quickly. From other countries, transfers can take a little longer on average.

Payment in advance Paypal

At the end of the order process you will be redirected to the page of Paypal. There you can initiate your payment. As soon as the Paypal transaction is completed, the status of your order will change in the store. The goods will then be shipped as soon as possible.

Comparison

Comparison of e-bike tuning products

 

JUM-Ped

MTT

Badass Box

RedPed / BluePed /
GreenPed

VOLspeed

PearTune

SpeedBox

MBIQ

sIMPLEk

Sx2 Dongle

Type

Software (Module)
Software
(Controller)
Box Module Module Module Module (Kit)
Module /
Sensor
(Kit)
Module /
Dongle
Dongle
Range of functions ***** ***** * ***** **** *** *** *** *** / ** *

Easy installation of the tuning

***** ***** **** ** ** ** ** ** / * ** / * *

Invisible after installation

***** ***** * ***** ***** ***** ***** ***** ***** / **** ****

Switching on / off while riding

*
Gerät
*****
Gerät, Display
*
Box
*****
App, Display
*****
Display
*****
Display
*****
(App), Display
***
Display, Magnet
***** / ****
Display /
Dongle
****
Dongle, (Licht)

No more tuning Module at the bike

***** ***** ***** * * * * * * / **** ****

Invisible dismantling

***** ***** ***** ***** ***** ***** ***** ***** ***** / *** ***

Easy dismantling

***** ***** ***** ** ** ** ** ** / * ** / * *

Correct display of km/h

*****
Display
*****
Display
* *****
Display, App
*****
Display
*****
Display
*****
Display, App
* ****
Display
*

Dethrottling

***** ***** ***** ***** ***** ***** ***** ***** ***** *****

Reducing

* ***** * ***** ***** ***** ***** * * *

Price range in euros

169 to
209
189 to 299 149 to 154 219 to
239
159 to 179 139 to
259
139 to
309
89 to
199
89 to
209
139 to
159

Legend

Customer reviews
Warnings

Important: Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads. Legally permissible use is therefore only possible on private property or - if permitted - in competitions. Driving an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license as well as driving without insurance coverage. Tuning measures on the e-bike and e-scooter can lead to a loss of warranty rights and manufacturer warranties. In addition, tuning measures can lead to a loss of insurance coverage and accident victim assistance benefits in the event of accidents. The e-bike (or e-scooter) modified by tuning measures is exposed to an additional load due to the higher speed, which can lead to safety risks.

MBIQ-S Tuning Sensor for AEG / Bafang / Prophete with 4pin plug blue (HIGO)

MBIQ-S Tuning Sensor for AEG / Bafang / Prophete with 4pin plug blue (HIGO)

149,90 €
Pre-loader