New
PRE ORDER
OUT STOCK

SpeedBox 3.1 for Giant (RideControl Go)

TYPE: Yamaha Syncdrive

VENDOR: Speedbox

209,00 €

PRODUCT INFORMATION
Payment & Shipment
Comparison
Customer reviews
Warnings
PRODUCT INFORMATION

SpeedBox 3.1 for Giant (RideControl Go)

Important: The manufacturer recommends NOT to perform software updates on the e-bike!

This is a reliable third generation tuning chip that completely removes the 25 km/h speed limit of e-bikes with Giant SyncDrive Pro Motor 2022 and RideControl Go. You even have the option of setting the maximum top speed to an individual value.

Even with active tuning, the e-bike display shows correct values such as speed, daily distance and range.


Tuning can be switched on and off

After installing the SpeedBox 3.1 chip, the tuning can be easily switched on with the WALK button. The display briefly shows a value of 9.9 km/h - this signals that the tuning has been activated and the speed limit has been lifted.

To switch off the tuning, simply press the WALK button again - a short 2.5 km/h display then signals that the tuning has been cancelled and the maximum supported speed is limited to 25 km/h again. After this, your e-bike will function as it did before the chip was installed.

Tip: For e-bikes without a classic control panel with WALK button, the tuning can alternatively be switched on and off with the key combination + - + -.


Setting the maximum speed

The desired maximum speed can also be conveniently set using the control buttons of the e-bike, entirely without a PC or smartphone.

First switch the mode three levels down and then three levels up. Then the current speed limit is displayed. To change the maximum speed, briefly press the WALK button or turn the rear wheel 360°.

A displayed speed of 1.5 km/h would correspond to a maximum speed of 15 km/h, a 2.0 km/h display would correspond to 20 km/h, 3.0 km/h would correspond to 30 km/h, and so on.

After 5 seconds of inactivity, the last displayed speed limit is saved.


Installation

The SpeedBox 3.0 is a module or chip that must be connected to the engine. Thanks to colour-coded connectors, installation is simple and can also be done by yourself.

-First you have to switch off your e-bike and remove the battery.

-Then remove all parts of the e-bike so that you have access to the connectors on the motor.

-Disconnect the connectors on the cable from the motor to the speed sensor and from the motor to the display.

-Connect the SpeedBox to the disconnected connectors.

-Return the e-bike to its original condition.

-Switch on the e-bike and activate the tuning by pressing the WALK button.

That's it - your GIANT E-bike is tuned now and you can ride much faster with full motor support!

If at some point you want to restore your Giant e-bike to its original condition, you can easily remove the tuning chip at any time.

Important note: If you want to install the SpeedBox in a brand new GIANT e-bike, you must first ride the bike for at least 1 km before switching on the chip for the first time.

The SpeedBox does not require its own battery.


SpeedBox 3.1 for Giant (RideControl Go) - Compatibility

-RideControl Go

-Giant SyncDrive Pro motor from model year 2022.

NOT compatible with engines and software updates from 2023 onwards.

Not compatible with the SpeedBox App.

Not compatible with Giant Revolt E+ (2022-2023) / EnergyPak Plus.

Important:
The manufacturer recommends NOT to perform software updates on the e-bike!

Note: This tuning tool is also available in a "B.Tuning" version that is compatible with the SpeedBox app. This allows you to benefit from various additional functions, e.g. ride data analysis & engine lock, hide tuning etc....

Payment & Shipment

Delivery time, Shipping costs, Minimum order value und Payment methods:

Delivery time

Delivery time is 1-8 business days within Germany. Postal delivery time outside Germany may take longer.

Shipping area

We ship to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.

For shipping to Germany please use our german shop.

For a solution to Switzerland and Liechtenstein please see here.

We do not ship to the USA, France, Canada (including all overseas territories) and generally outside the EU.

Shipping costs

The shipping costs for Germany are 3,50 Euro. The shipping costs are waived from an order value of 180 Euro. For countries within the EU the shipping costs are 9,90 Euro. The shipping costs are waived from an order value of 300 Euro. We ask you to cover the cost of any return shipment yourself. Please note that customs fees may apply in third countries outside the European Union.

Minimum order value

The minimum order value is 25 Euro. Only from this amount you can use prepayment or PayPal and bank transfer as payment methods.

Maximum order value

The maximum order value for orders outside the EU is 1.000 Euro. The maximum order value within the EU is 12.500 Euro.

Payment in advance bank transfer

Please transfer the total amount with your order number to our account which you received in the confirmation email. Please note that bank transfers within Germany can take up to three working days. Transfers from abroad, especially from Austria and Switzerland, usually arrive very quickly. From other countries, transfers can take a little longer on average.

Payment in advance Paypal

At the end of the order process you will be redirected to the page of Paypal. There you can initiate your payment. As soon as the Paypal transaction is completed, the status of your order will change in the store. The goods will then be shipped as soon as possible.

Comparison

Comparison of e-bike tuning products

 

JUM-Ped

MTT

Badass Box

RedPed / BluePed /
GreenPed

VOLspeed

PearTune

SpeedBox

MBIQ

sIMPLEk

Sx2 Dongle

Type

Software (Module)
Software
(Controller)
Box Module Module Module Module (Kit)
Module /
Sensor
(Kit)
Module /
Dongle
Dongle
Range of functions ***** ***** * ***** **** *** *** *** *** / ** *

Easy installation of the tuning

***** ***** **** ** ** ** ** ** / * ** / * *

Invisible after installation

***** ***** * ***** ***** ***** ***** ***** ***** / **** ****

Switching on / off while riding

*
Gerät
*****
Gerät, Display
*
Box
*****
App, Display
*****
Display
*****
Display
*****
(App), Display
***
Display, Magnet
***** / ****
Display /
Dongle
****
Dongle, (Licht)

No more tuning Module at the bike

***** ***** ***** * * * * * * / **** ****

Invisible dismantling

***** ***** ***** ***** ***** ***** ***** ***** ***** / *** ***

Easy dismantling

***** ***** ***** ** ** ** ** ** / * ** / * *

Correct display of km/h

*****
Display
*****
Display
* *****
Display, App
*****
Display
*****
Display
*****
Display, App
* ****
Display
*

Dethrottling

***** ***** ***** ***** ***** ***** ***** ***** ***** *****

Reducing

* ***** * ***** ***** ***** ***** * * *

Price range in euros

169 to
209
189 to 299 149 to 154 219 to
239
159 to 179 139 to
259
139 to
309
89 to
199
89 to
209
139 to
159

Legend

Customer reviews
Warnings

Important: Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads. Legally permissible use is therefore only possible on private property or - if permitted - in competitions. Driving an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license as well as driving without insurance coverage. Tuning measures on the e-bike and e-scooter can lead to a loss of warranty rights and manufacturer warranties. In addition, tuning measures can lead to a loss of insurance coverage and accident victim assistance benefits in the event of accidents. The e-bike (or e-scooter) modified by tuning measures is exposed to an additional load due to the higher speed, which can lead to safety risks.

SpeedBox 3.1 for Giant (RideControl Go)

SpeedBox 3.1 for Giant (RideControl Go)

209,00 €
Pre-loader